The machine is designed for the production of various molded products. This machine processes the workpiece from four sides in one pass. The machine is equipped with four milling spindles.
The machine uses a dispersed type feed mechanism with upper and lower drive rollers.
Upper feed rollers with wolf-tooth grooves ensure reliable feeding of any workpiece, including workpieces with natural moisture.
Mechanical clamps of the upper feed rollers provide uniform force and smooth passage of the workpiece through the cutting zones, and also allow working at low temperatures.
The drive of the lower rollers uses cardan transmissions that do not require maintenance.
Front and rear clamps completely eliminate “breakouts” at the entry and exit of the workpiece from the cutting zone and are equipped with a guide element that ensures their precise positioning and ease of adjustment.
Specifications machine S16-42 | Options |
Processing width, mm | 30-160 |
Processing height, mm | 10-100 |
Minimum workpiece length when processing in a stream, mm | 400 |
Minimum length of a single workpiece, mm | 700 |
Maximum allowance when processing with cylindrical cutters, mm: | |
- for the lower cutter | 5 |
- for top and vertical | 8 |
Number of spindles, pcs. | 4 |
Spindle speed, rpm | 6000 |
Landing dimensions of horizontal spindles, length x diameter, mm | 170 x 40h6 |
Mounting dimensions of vertical spindles, length x diameter, mm | 110 x 40h6 |
Diameter of vertical profile cutters, mm | 110-160 |
Diameter of the upper horizontal profile cutter, mm | 110-160 |
Diameter of cylindrical cutters, mm (it is possible to install a cutter max O144mm on the lower spindle) | 125-140 |
Feed speed (two ranges, regulated by frequency converter), m/min | 3…14; 6…26 |
Machine weight, kg, no more | 2000 |
Machine dimensions, length x width x height, mm | 2455 x 1250 x 1400 |
Caliper movements
Technical characteristics of electrical equipment
Name of parameters | Machine model and parameters | |
C16-2.00.000 | С16-42.01.000 | |
Type of supply current | AC, three-phase | |
Current frequency, Hz | 50 | |
Voltage, V | 380 | |
Number of electric motors on the machine, pcs. | 5 | |
Electric cutter drive motors: | ||
bottom, right, left, kW | 4,0 | 4,0 |
top, kW | 4,0 | 7,5 |
rotation speed, rpm. | 3000 | |
Feed drive electric motors: | ||
quantity, pcs. | 1 | |
power, kW | 1,5 | |
rotation speed, rpm. | 930 | |
Total power of all electric motors, kW | 17,5 | 21 |
The basic equipment of the machine includes:
Designation and name | Qty | Purpose |
S16-1A.00.028 Bushing | 5 | Possibility of processing narrow workpieces. They are installed instead of the left row of feed toothed rollers in the direction of movement of the workpiece. |
IP.17.000 Key | 1 | Tightening and loosening the tool securing nut to the spindle. |
IP.36.000 Set of rings | 2 | Spacers on spindle shafts for the possibility of installing wood-cutting tools of various lengths. |
DIN468-160-V17 Handle | 1 | Movement of calipers in horizontal and vertical directions. Loosening and tightening the locking screws. |
Replacement parts and accessories ordered optionally (on additional request and at additional cost)
The range and quantity of wood-cutting tools supplied with the machine is determined in accordance with the supply agreement (including cylindrical cutters).
The aspiration system is purchased at the rate of 1200 cubic meters per hour per machine support.
The cast bed, made of high-strength cast iron, provides exceptional rigidity and reliability of the machine, and reduces vibration to a minimum. | For processing workpieces with high humidity, the upper feed rollers are made with wolf-tooth corrugation. | ||
The long front feed table improves the quality and accuracy of processed workpieces. | The task of facilitating the passage of the workpiece through the cutting zones and removing resin and dust from the surface of the tables is solved by a lubrication system. | ||
The electrical cabinet and control panel are equipped with modern equipment. | The spindle positioning system is mounted on the front panel of the machine. For ease of operation, the mechanisms are equipped with digital indicators with an accuracy of 0.1 mm, which facilitates adjustment and control. |
||
The front clamps (sectional type) and the rear ones are adjustable for the processing size, completely eliminating “breakouts” at the entry and exit of the workpiece. | The change in feed speed is stepless and is provided by a variator. This guarantees a smooth and constant feed of workpieces during processing. Torque is transmitted to the lower feed rollers using cardan shafts. |
S16-51. Five milling spindles of a heavy series machine.
The C16-51 woodworking longitudinal milling machine is designed for flat and profile processing of lumber (bars, boards, etc.) from 4 sides in one pass.
Attention!This equipment is no longer in production! You can check the exact price and production time from our managers.
Features of the 4-sided machine S16-51Profile work can be performed with side, top and molding cutters. To divide the material being processed along the width, saws can be installed on the molding support spindle. The molding caliper has the ability to work in both the lower and upper positions. The long front table improves the quality of workpiece processing. All machine mechanisms are installed on a cast frame. The feed mechanism of the machine is of a dispersed type with upper and lower driven feed rollers.
- The material of the frame is cast iron.
- Control system - manual with automatic feed.
- The machine is equipped with safety devices and interlocks.
- The feed mechanism is of a dispersed type, has upper and lower rollers.
- Spindles: 1-bottom, 2-right, 3-left, 4-top, 5-top/bottom.
- Spindle 5 has additional support.
- Profile cutters are installed on all spindles except the bottom one.
- The equipment is certified.
Replacement parts and accessories* can be ordered optionally (upon additional request and at an additional cost).
* - the range and quantity of wood-cutting tools supplied with the machine is determined in accordance with the supply agreement (including cylindrical cutters).
We recommend purchasing additionally- Soundproof fencing. Personnel protection from noise vibrations - 1 pc.
- Pneumatic clamping system. Simplification of pressure adjustment of pressure rollers - 1 set.
- Digital reading devices for adjusting the processing size - 1 pc.
Specifications | S16-51 |
Workpiece dimensions, mm | |
Processing width | 32-160 |
Processing height | 12-125 |
Minimum workpiece length when processing in a stream | 250 |
Minimum length of a single workpiece | 700 |
Maximum thickness of the workpiece during longitudinal sawing, mm | 50 |
Minimum dimensions products, mm | |
Width | 30 |
Height | 10 |
Maximum allowance when processing with cylindrical cutters, mm | 7 |
Number of spindles, pcs. | 5 |
Spindle speed, rpm | 6000 |
Maximum depth of processed profile, mm | 20 |
Landing dimensions of horizontal spindles, mm | |
Diameter | 40h6 |
Landing dimensions of vertical spindles, mm | |
Diameter | 40h6 |
Diameter of cylindrical cutters, mm | 140 |
*Diameter of vertical profile cutters, mm | 140-180 |
Diameter of horizontal profile cutter, mm | 140-180 |
Diameter of installed saws (5 spindle), mm | 250 |
Feed speed, m/min | 7-35 |
Power, kW | |
Electric motor of the 1st spindle | 7,5 |
Electric motor of the 2nd spindle | 7,5 |
3rd spindle electric motor | 7,5 |
Electric motor of the 4th spindle | 7,5 |
Electric motor of the 5th spindle | 7,5 |
Feed drive | 4 |
Lifting and lowering | 1,1 |
Total machine power (rounded), kW | 42,6 |
Diameter of aspiration outlet pipes, mm | DN120 |
Required aspiration capacity, m 3 /h | 5x2000 |
Overall dimensions of the machine, mm | |
Length | 4950 |
Width | 1370 |
Height | 1840 |
Weight, kg | |
Stanka | 4950 |
* - profile cutters are not installed on the lower support.
Scope of delivery four-sided machine S16-51- Complete machine - 1 piece.
- Key. Tightening and loosening the tool fixation nut on the spindle - 1 pc.
- Set of rings. Spacers on horizontal spindle shafts for the possibility of installing wood-cutting tools of various lengths - 6 pcs.
- Lever. Movement of calipers in horizontal and vertical directions. Loosening and tightening locking screws - 1 pc.
- Operation manual - 1 pc.
Four-sided machine model s16-42(light series, four spindle machine) model is designed for the production of various molded products. This machine processes the workpiece from four sides in one pass. The machine is equipped with four milling spindles.
The machine uses a dispersed type feed mechanism with upper and lower drive rollers.
Upper feed rollers with wolf-tooth corrugation ensure reliable broaching of any workpieces, including workpieces with natural moisture.
Mechanical clamps of the upper feed rollers provide uniform force and smooth passage of the workpiece through the cutting zones, and also allow working at low temperatures.
The drive of the lower rollers uses cardan transmissions that do not require maintenance.
Front and rear clamps completely eliminate “breakouts” at the entry and exit of the workpiece from the cutting zone and are equipped with a guide element that ensures their precise positioning and ease of adjustment.
Technical characteristics of the four-sided machine S16-42 | Options |
Processing width, mm | 30-160 |
Processing height, mm | 10-100 |
Minimum workpiece length when processing in a stream, mm | 400 |
Minimum length of a single workpiece, mm | 700 |
Maximum allowance when processing with cylindrical cutters, mm: | |
- for the lower cutter | 5 |
- for top and vertical | 8 |
Number of spindles, pcs. | 4 |
Spindle speed, rpm | 6000 |
Landing dimensions of horizontal spindles, length x diameter, mm | 170 x 40h6 |
Mounting dimensions of vertical spindles, length x diameter, mm | 110 x 40h6 |
Diameter of vertical profile cutters, mm | 110-160 |
Diameter of the upper horizontal profile cutter, mm | 110-160 |
Diameter of cylindrical cutters, mm (it is possible to install a cutter max O144mm on the lower spindle) | 125-140 |
Feed speed (two ranges, regulated by frequency converter), m/min | 3…14; 6…26 |
Machine weight, kg, no more | 2000 |
Machine dimensions, length x width x height, mm | 2455 x 1250 x 1400 |
Technical characteristics of electrical equipment | ||
Name of parameters | Machine model and parameters | |
C16-2.00.000 | С16-42.01.000 | |
Type of supply current | AC, three-phase | |
Current frequency, Hz | 50 | |
Voltage, V | 380 | |
Number of electric motors on the machine, pcs. | 5 | |
Electric cutter drive motors: | ||
bottom, right, left, kW | 4,0 | 4,0 |
top, kW | 4,0 | 7,5 |
rotation speed, rpm. | 3000 | |
Feed drive electric motors: | ||
quantity, pcs. | 1 | |
power, kW | 1,5 | |
rotation speed, rpm. | 930 | |
Total power of all electric motors, kW | 17,5 | 21 |
The basic equipment of the machine includes: | ||
Designation and name | Quantity | Purpose |
S16-1A.00.028 Bushing | 5 | Possibility of processing narrow workpieces. They are installed instead of the left row of feed toothed rollers in the direction of movement of the workpiece. |
IP.17.000 Key | 1 | Tightening and loosening the tool securing nut to the spindle. |
IP.36.000 Set of rings | 2 | Spacers on spindle shafts for the possibility of installing wood-cutting tools of various lengths. |
DIN468-160-V17 Handle | 1 | Movement of calipers in horizontal and vertical directions. Loosening and tightening the locking screws. |
Replacement parts and accessories ordered optionally (on additional request and at additional cost) | ||
Designation and name | Quantity | Purpose |
Vibration support OV-31M | 4 | Installation of the machine on the foundation. |
Wooden box | 1 | For packing the machine. |
The range and quantity of wood-cutting tools supplied with the machine is determined in accordance with the supply agreement (including cylindrical cutters). |
S16-1A
Four-sided planer C16-1A.
Model: S26-1A (Borovicheskiy SSZ) sold, price______ rub.
Designed for the production of lining, floorboards, planed timber, platbands, plinths and other shaped moldings from edged boards or timber in industrial volumes (up to 2.5 m3/hour). Workpieces are processed simultaneously from 4 sides in one pass with a constant supply of material throughout the entire processing area. On the machine bed there are all supports and a front table, which serves to base the workpiece before processing it and determine the amount of material removed from the bottom surface of the workpiece. Steel overhead tables and guide rulers are attached to the upper plane of the frame, along which the workpieces move. In the direction of material supply, the cutting heads are located in the following order:
- lower horizontal
- right vertical
- left vertical
- top horizontal
An extended front table and an improved design of side clamps allow the workpiece to be securely positioned, and a distributed feed mechanism with drive rollers ensures its reliable movement. Rollers installed along the entire length of the machine prevent material from slipping.
The speed of movement of the workpiece is controlled by a variator.
Technical characteristics of S16-1A:
Dimensions of processed material, mm | width | 30-160 |
---|---|---|
thickness | 8-100 | |
shortest length | 400 | |
Feed speed, m/min | 8-45 | |
Number of spindles | 4 | |
Milling cutter speed, rpm | 6000 | |
Diameter of cutters, mm | cylindrical | 140 |
profile | 140-180 | |
Total power of electric motors, kW | 29,8 | |
Overall dimensions, mm | 3460x1170x1800 | |
Weight, kg | 4000 |
Four-sided machines are designed for the production of various molded products. These machines process the workpiece from four sides in one pass. The machine is equipped with four milling spindles.
The machine uses a dispersed type feed mechanism with upper and lower drive rollers. The upper feed rollers with wolf-tooth grooves ensure reliable broaching of any workpieces, including workpieces with natural moisture. Mechanical clamps of the upper feed rollers provide uniform force and smooth passage of the workpiece through the cutting zones, and also allow working at low temperatures. The drive of the lower rollers uses cardan transmissions that do not require maintenance. Front and rear clamps completely eliminate “breakouts” at the entry and exit of the workpiece from the cutting zone and are equipped with a guide element that ensures their precise positioning and ease of adjustment.
Design features
The cast bed, made of high-strength cast iron, provides exceptional rigidity and reliability of the machine, and reduces vibration to a minimum. | |
The long front feed table improves the quality and accuracy of processed workpieces. | |
The electrical cabinet and control panel are equipped with modern equipment. | |
The front clamps (sectional type) and the rear ones are adjustable for the processing size, completely eliminating “breakouts” at the entry and exit of the workpiece. | |
For processing workpieces with high humidity, the upper feed rollers are made with wolf-tooth corrugation. | |
The task of facilitating the passage of the workpiece through the cutting zones and removing resin and dust from the surface of the tables is solved by a lubrication system. | |
The spindle positioning system is mounted on the front panel of the machine. For ease of operation, the mechanisms are equipped with digital indicators with an accuracy of 0.1 mm, which facilitates adjustment and control. |
|
The change in feed speed is stepless and is provided by a variator. This guarantees a smooth and constant feed of workpieces during processing. Torque is transmitted to the lower feed rollers using cardan shafts. |
Basic equipment of the machine
Designation and name | Quantity | Purpose |
S16-1A.00.028 Bushing | 5 | Possibility of processing narrow workpieces. They are installed instead of the left row of feed toothed rollers in the direction of movement of the workpiece. |
IP.17.000 Key | 1 | Tightening and loosening the tool securing nut to the spindle. |
IP.36.000 Set of rings | 2 | Spacers on spindle shafts for the possibility of installing wood-cutting tools of various lengths. |
DIN468-160-V17 Handle | 1 | Movement of calipers in horizontal and vertical directions. Loosening and tightening the locking screws. |
Optional replacement parts and accessories
upon additional request and for an additional fee
The aspiration system is purchased at the rate of 1200 cubic meters per hour per machine support.