The release was approved by the Decree of the Ministry of Labor and social development Russian Federation dated 14.11.2000 N 81
Driver pumping station for injection of working agent into the reservoir
§ 7. Operator of a pumping station for pumping working agent into the reservoir
Characteristics of work. Maintenance of technological equipment: cluster pumping stations, block cluster pumping stations and electric centrifugal submersible installations for the injection of fresh, highly mineralized water waste water; water distribution devices, water collection and treatment plants; oil system air cooling units; systems automatic operation ventilation units. Monitoring the smooth operation of pumps and electric motors and taking the necessary corrective action. Maintaining a given regime of water injection into the reservoir for each well. Participation in installation and dismantling of equipment. Treatment of process fluid or water with reagents in order to reduce corrosion activity or increase oil-displacing and oil-displacing properties. Monitoring the operation of control and measuring instruments. Carrying out routine repairs of serviced equipment. Maintaining a log of water injection into wells, a log of the operation of maintained equipment and electricity consumption.
Must know: purpose, rules of operation and maintenance of pumps, air cooling devices and automatic ventilation units, electric motors, pumping station equipment, used instrumentation and automation equipment; technological mode of injection of working agent into individual wells; diagram of connecting the well to pressure pipelines; piping diagram of the serviced pumping station and pipelines; basic chemical properties reagents used, fresh highly mineralized wastewater; rules for safe work when servicing the wastewater collection and treatment system; arrangement of personal protective equipment and rules for their use.
When servicing pumping stations with less than 4 operating units or with a water injection volume of up to 2.7 thousand cubic meters. m/day inclusive - 3rd category;
when servicing pumping stations with the number of operating units from 4 to 6 inclusive or with a water injection volume from 2.71 to 7.2 thousand cubic meters. m/day inclusive - 4th category;
when servicing pumping stations with more than 6 operating units or with a water injection volume of more than 7.2 thousand cubic meters. m/day - 5th category.
Service technological equipment: cluster pumping stations, block cluster pumping stations and electric centrifugal submersible installations for the injection of fresh, highly mineralized wastewater; water distribution devices, water collection and treatment plants; oil system air cooling units; systems for automatic operation of ventilation units.
Monitoring the smooth operation of pumps and electric motors and taking the necessary corrective action.
Maintaining a given regime of water injection into the reservoir for each well.
Participation in installation and dismantling of equipment.
Treatment of process fluid or water with reagents in order to reduce corrosion activity or increase oil-displacing and oil-displacing properties.
Monitoring the operation of control and measuring instruments.
Carrying out routine repairs of serviced equipment.
Maintaining a log of water injection into wells, a log of the operation of maintained equipment and electricity consumption.
Requirements
Average general education And vocational training- programs vocational training workers under the program "Pumping Station Operator"
Minimum 1 year of work experience
Service experiencepumping stationswith the number of operating units from 4 to 6 inclusive or with a volumedownloadswater from 2.71 to 7.2 thousand m3/day inclusive
Basic office skills Microsoft applications: Word, Excel, Outlook, Power Point, Visio
Terms
Employer: Branch Plant for the preparation of condensate for transport LLC Gazprom Pererabotka
Location: g. Novy Urengoy
Region: Yamalo-Nenets autonomous region
Working hours: shift, permanent employment relationship
Employment for this vacancy is planned in 2017
In the field of prospecting and development of oil, gas and gas condensate, there are many working class specialties that are focused on creating or maintaining certain conditions for uninterrupted operation various systems, devices and installations. These professions include the driver of a pumping station for pumping working agent into the reservoir.
Description of the profession
A pumping station operator for pumping working agent into a reservoir is a qualified employee who works at a pumping station, monitors its serviceability and operation in a given mode, and also neutralizes any malfunctions that arise during operation. The level of his qualification determines the degree of productivity and the number of pumping units used in the work.
To successfully implement the tasks assigned to him, the driver must have an idea of how to work with pumps, air cooling devices, automatic ventilation units, electric motors, pumping station devices, and what kind of equipment they have. technological features and principles of service. In their work, the worker also uses reagents, so they must understand them, know their properties, and safety rules when working with them.
During active operation of the equipment, the driver monitors the readings of instrumentation and conducts visual inspection mechanisms for damage. If damaged elements are discovered, the specialist is obliged to immediately stop the work process and carry out the required work according to the situation. renovation work. In addition, it regulates and maintains the established mode of water injection into the reservoir.
Since the activity of a pumping station driver carries a certain amount of risk and implies great responsibility for the serviceability of the equipment and the continuous operation of the entire installation, before obtaining permission to work, a specialist must undergo medical examination and listen to instructions on safety and labor protection rules. Workers with average special education or higher education in the oil and gas industry, can begin to fulfill their official duties no work experience. Thus, the worker must be over 18 years old, and he must also have special education.
If a production need arises, the driver of the pumping station for pumping the working agent into the reservoir may be involved in overtime performance of his duties. job responsibilities. In turn, if necessary, the worker can attract specialists from other departments. For example, a repair team, if the level of breakdown goes beyond the knowledge and skills of a specialist. However, it must be taken into account that such decisions must be previously discussed with the manager.
Where can I learn to be a pump station driver for pumping working agent into the reservoir?
Thanks to the presence of specialized education, the driver has the opportunity not only to successfully realize his or her chosen professional field, but also to develop in the industry. This can be either secondary specialized or higher education. The degree of complexity of the work entrusted to a specialist depends on the level of education. In addition, if you have a specialized education, you can be hired as a driver without work experience.
During their studies, future specialists study the features of the oil and gas industry as a whole, become familiar with the main areas of activity, and also master the operating principles of various equipment.
You can also obtain this specialty by taking courses at educational centers with the necessary certification. In this case, the time to obtain the necessary education will be significantly reduced.
In addition, the development of the industry requires all involved specialists to regularly improve the level of their knowledge, master new devices and tools to use them in their labor activity. To achieve this, employees undergo advanced training and professional retraining courses.
Professional categories of pump station operator for pumping working agent into the reservoir according to ETKS
This specialty has three qualification levels: from third to fifth.
Operator of a pumping station for pumping working agent into the reservoir, 3rd category
Qualified to work with equipment that has low productivity - up to 2.7 thousand m³/day. He must monitor the activity and maintain up to four pumps.
Operator of a pumping station for pumping working agent into the reservoir, 4th category
Can operate and maintain four to six pump units. They have average productivity, which varies from 2.71 to 7.2 thousand m³/day.
Pumping station operator for pumping working agent into the formation, 5th category
He is qualified to work with a high-performance station, the system of which has more than six pumping units, and their total productivity exceeds 7.2 thousand m³/day.
Personal qualities of the profession of operator of a pumping station for pumping working agent into the reservoir
Working with injection stations requires that a specialist knows how to distribute his attention in order to monitor the serviceability of all processes of the entrusted equipment, determining the admissibility of certain readings. And if an emergency situation arises, he will not lose his composure and will be able to quickly carry out the actions required according to the instructions.
Thus, the main qualities of a driver include attentiveness, observation, readiness for monotonous work, resistance to stress, and the ability to make quick decisions.
Salary level for the profession of driver of a pumping station for pumping working agent into the reservoir
The monthly salary of a driver can vary from 50,000 to 80,000 rubles. It depends on criteria such as professional rank and length of service.
Pros and cons of the profession of a pumping station driver for pumping working agent into the reservoir
TO pros professions should include:
demand in the labor market;
the opportunity to start working without experience;
high level wages;
prospects for career growth and development.
TO cons This specialty should include:
hazardous working conditions;
high responsibility.