Rostelecom settings. Connecting and setting up equipment

home Labor Relations Good day, friends! Today we will consider the topic of Rostelecom setting up a router, using the example of the d link dir 300 router. First, let’s clarify the basic data of the Rostelecom provider. Since this provider uses the PPPoE connection type, you will need to look at the contract or check with

technical support

Rostelecom Your username (login) and password to access the Internet, after which we proceed to setting up the router.

We start setting up Rostelecom wifi by plugging the router into a power outlet and connecting the computer to the router using the cable that comes with your router. We insert one end of the cable into the computer’s network card and the other into any LAN port on the router. If everything is done correctly, three lights will light up: power, LAN port and wifi. Go ahead. Login to the router interface So

wifi setup

Rostelecom proceed to the next step - entering its interface (control panel). To do this, launch your Internet browser (Internet Explorer, Opera, Google Chrome and others). In the address bar, which is located at the top (where you enter the name of the site), enter the following - 192.168.0.1 and press Enter. A window will appear asking you for your username and password. Enter the login admin, leave the password blank and click “Login”. In front of us will be the router control panel.

Here we will look at quick router setup. Next, we do the following: specify a new password for the router and click the “Next” button again. Then select the time zone in which you are located and click the “Next” button. Place a dot (click on the radio button) against the connection type “Connections by username / password (PPPoE)” and click “Next”.

In the next window, put a dot in “ Dynamic IP address" And in the “Username” fields we enter your login according to the agreement with the provider, and in the “Password” and “Password check” fields we enter your Internet password. Click “Next”. Then a reboot will occur. This concludes the quick setup of Rostelecom wifi for Internet access.

Now let's set up a wireless network. To do this, go back to the main interface and click on the “Installation” tab at the top. Then in the left column select “Install wireless network" and click the "Wireless Connection Setup Wizard" button, read the text and click "Next".

In the “Wireless network name” field, the name you want for your wireless network. Check the box “Manually assign a network key”, then let’s take care of security, check the box next to “Use WPA encryption...”. Click the “Next” button.

Internet provider Rostelecom is one of the oldest telephone operators and providers in the territory Russian Federation. The list of services they provide is quite large. This is not only an Internet connection, but also interactive television and telephony. In addition, this operator produces its own equipment. Therefore, it is not surprising that many users are interested in how to set up Rostelecom equipment.

Rostelecom routers

It is clear that the company itself does not have its own factories that produce routers. In fact, everything is done simply: a batch of equipment is purchased from Chinese manufacturers - such as Huawei, D-Link, ZTE, etc. - and the company logo is pasted on. This is a common practice that is carried out all over the world.

Currently, the most common router models are:

Sagemcom f@st 2804;

Sagemcom f@st 3804;

• D-Link DVG-5402SP;

  QTech RT-A1W4L1USBn;

  ADSL router Startnet AR800;

  D-Link DSL-2640U T3;

  WiFi router Sagemcom f@st 1744.

As can be seen, there is a wide variety of models. And therefore, setting up Rostelecom equipment can cause difficulties for a beginner. But they are similar in many ways, so by understanding how one model of router or modem is configured, you can learn how to work with other types of equipment.

Basic settings of a D-Link router

D-Link equipment is very loved by operators on Russian market. Rostelecom was no exception. Setting up D-Link (routers) usually goes quite smoothly and does not require any highly specialized knowledge from the user.

Afterwards you will need to launch any browser and type in the address bar: 192.168.0.1. The router settings window will open. Here you will need to enter the following combination as your password and login: admin and admin.

A beginner can easily use the “Setup Wizard”, which in a semi-automatic mode will provide all the necessary settings for Rostelecom and other operators.

Advanced D-Link router settings

The settings menu is called up in the same way as indicated above, through any Internet browser. Next, you will need to click on the Click’n’Connect tab and connect the cable from your provider.

At the next stage, you should give the connection a name and come up with your password and login. If the password and login were issued by Rostelecom itself, then you don’t need to come up with anything, you should enter exactly them.

It is possible that you will additionally be asked to enter VPN, DNS and other data that Rostelecom also provides when concluding an agreement. The connection of the test node will begin immediately after clicking on the “Apply” screen button.

Setting up Wi-Fi. Rostelecom, D-Link

Once the wired Internet is successfully connected, you can proceed to Wi-Fi settings. Everything is quite simple here. You only need to come up with a name for the connection (SSID text field) and your own password (in the “Encryption Key” PSK field) so that no one can “connect” to the network from the outside.

At this point, Rostelecom will be completed on this router.

Setting up digital television on D-Link equipment

Rostelecom also provides services on digital television. The method used for connection also matters here - IPTV or VLAN.

In the first case, all you need is to specify the IPTV port. The second one will require a little tinkering. The situation is further aggravated by the fact that the D-Link settings interface is designed in such a way that after the Internet connection as a whole is configured, IPTV setup Rostelecom is no longer possible. Therefore, you should start with setting up television. If you have not purchased a TV package, then you can simply safely skip this type of setup.

So, if Internet television works via VLAN, then you will need to select the “Advanced” area in the main menu, then click on the VLAN link. You will be prompted to specify the specific port that is used by the set-top box. In most cases this is Port-4. You need to click on the “Delete port” item and then on “Save changes”.

There are two options:

IPTV comes in untagged form. In this case, you will need to select the WAN item, then in the “Port” section specify Port-4, and set the tag field to untagged. This achieves the result that the provider’s cable is connected directly to the set-top box, and not to the router.

• If IPTV is organized in tagged form, then setting up Rostelecom IPTV will require going through the following points: “Advanced - VLAN - Add”. You can write whatever you want in the name field, set the “Type” field to “transparent”, then select Port-4 and set the operating mode to untagged.

Setting up PPPoE "Rostelecom"

While in the main settings menu, you need to select the “Network” section, then follow the WAN link and click on the “Connect” button. The PPPoE advanced settings will open.

Accordingly, in the “Connection type” field you should set the PPPoE parameter and indicate the fifth WAN port. The login and password are those that were issued by Rostelecom itself. Done, you can go online.

As you can see, the Rostelecom settings for connecting via PPPoE are also quite simple; even a novice user can perform them.

Setting up a Rostelecom DSL modem

Some Rostelecom branches provide DSL routers and modems. You can consider the connection and configuration rules using the example of the D-LINK DSL-2640U model. For many other models, the procedure will be similar; there may only be some differences in the external interface of the settings window.

First you need to connect the device itself to the Internet using a provider cable. Then open any web browser and enter in the address bar: 192.168.1.1. Then in the dialog box, enter admin and admin again in the login and password fields.

The main settings window will open. Here you need to select the “Network” section and the “Connection” subsection, add a new connection and select PPPoE as the type. When filling out the VPI and PCI values, you need to clarify in advance which parameters should be specified for a given region.

And the password is filled in according to the data issued by Rostelecom.

The Keep Alive function must be enabled. The LCP interval and LCP failure values ​​can be set at your discretion. The last parameter indicates how many consecutive requests the modem will send to the provider to connect, and the first parameter indicates the time it takes to resend the request in seconds.

You should also check the IGMP and NAT options.

Zyxel Keenetic for Rostelecom

Modems from Zyxel were once very common in the post-Soviet space and even received the affectionate name “Zukhel” from users. Today there are many more models, but no one is going to write off the “good old” Zyxel.

Traditionally, setup should begin by opening a browser when the device is turned on, and typing in its address bar: http://192.168.1.1. You will be prompted to enter your username and password. Depending on the firmware version and the specific Zuhel model, the following parameters can be used: admin/admin or admin/1234.

Next, you will need to go to the “Internet” section and the “List” tab. Here follow the Broadband connection link. You can select any of the offered ones as a WAN port. You also need to make sure that the checkboxes next to the items “Enable interface” and “Use to access the Internet” are checked. But you will need to uncheck the “Obtain an address via DHCP” checkbox.

In the IP settings, you should specify “Do not use IP address” and in the “MAC address” item, select “Default”.

connection type - PPPoE;

come up with your own name for the connection;

connect via Broadband connection ISP;

The login and password are those issued by Rostelecom.

All that remains is to connect to the Internet.

As can be seen, for Zyxel Keenetic setting up Rostelecom is not as complicated as it might seem at first glance.

Another option for setting up Zyxel Keenetic.

Depending on the model of the Zuhel itself and the firmware it uses, the settings may look slightly different. For example, this will happen through the NetFriend Quick Setup Wizard.

First you need to reset all previous settings. To do this, when the modem is running, in the address bar of the browser you need to type: http://192.168.1.1/RU/nf.html or: http://my.keenetic.net/RU/nf.html.

At the next stage, the “Wizard” will ask you to specify VPI and VCI. They need to be clarified with Rostelecom regarding a specific region. The same applies to encapsulation parameters.

If Rostelecom has not provided an individual IP address, you will need to check “Automatic” at the next stage. Otherwise, enter the IP issued by Rostelecom. In addition, you will need to enter the gateway mask, gateway IP address, and DNS address. Rostelecom must also provide this data.

Then click the “Test connection” button.

Setting up a Rostelecom connection for 3G and 4G modems

Probably, things are easiest with the settings if the Rostelecom modem is 3G or 4G. All that is required in this case is to simply insert the modem into the USB connector of the computer and wait for the “Setup Wizard” to start. software". As a rule, you don’t need to do anything special, just occasionally agree to all the conditions and click on the “Next” on-screen button.

All the necessary settings and parameters are already built directly into the Rostelecom modem.

Connection via TV cable

It’s even easier if Rostelecom provides Internet access via television cable. All that is required in this case is to simply plug it into the appropriate connector in the equipment. Devices of this kind already have everything necessary for a successful connection.

Setting up a Rostelecom connection in Windows

You can make all the necessary settings to connect to the Internet through Rostelecom and standard Windows tools. This may look different for different versions of the operating system, the differences will only affect the selection of buttons and links, the principle of operation will remain the same.

For example, as for Windows 7 and older, Rostelecom settings are issued automatically for each computer. This applies to the IP address and other parameters. The user only needs to plug the Ethernet cable into the connector on the PC's network card.

If for some reason you need to inquire about the settings or enter them manually, then to do this you will need to select “Internet and network connections” in the “Control Panel”, right-click on the connection icon, select “Properties” from the context menu that appears. Then you will need to check “IP Version 4 Properties” in a new window and click on the “Properties” button. The values ​​that appear in separate window You can write them down on a separate piece of paper or in a text file so that you can enter them yourself if necessary.

Configuring the Sagem FAST 2804 universal router into ADSL modem mode.

Universal router Sagem FAST 2804 in one of its incarnations it is ADSL modem with very good functionality and pleasant appearance. In fact, this device can be put on a par with such models as D-Link DSL-2640U/NRU, Acorp W422G And ASUS DSL-N10. A very useful feature is the presence USB ports- allows, if necessary, to organize a backup channel using 3G modem .
For setting up any special difficulties Sagem FAST 2804 doesn't, but the web interface is a bit confusing. The device address on the network is standard - http://192.168.1.1, login admin and password admin.

Step 1. Removing an existing PPP connection. Select a section Additional settings -> WAN service.

In the table by default there is already one existing connection, put a checkmark Delete and press the button Delete.
Step2. Delete existing WAN port settings. Select a section Additional settings -> Second level interface -> ATM PVC interface.

There is also a default PVC 8/32 created here, which does not suit us. Check the Delete box and click the Delete button.
Step3. Creating a PVC connection. After the connection is deleted, press the button Add and create a new one:

We set VPI/VCI parameters - in branches Rostelecom single standard - 0/33 . Type DSL Link the default is EoA- it is also used for the mode PPPoE and for Bridge. Encapsulation mode - LLC. Press the button Apply/Save.
Step4. Create a new connection on a new ATM connection. Go to the section WAN service:

To add a new connection, click the button Add.

The next step is to select the physical interface atm0 and press Further.

If you need to configure the connection mode on the modem transparent bridge(Bridge)- for example for IPTV c VPI/VCI 0/50- select a mode Bridging and press Further. Result: show

If you need to configure the modem in router mode(Router)- choose PPPoE and press Further:

In this window, enter the username and password given to you upon connection. In field PPPoE Service Name you can enter the name of the connection - for example inet. Next, check the box retry PPP on authentication failure and press the button Further.

Here we leave everything as default and click Further.

Settings DNS We also leave automatic, press Further.

The connection has been created, click Apply/Save. This completes the basic connection setup on Sagem fast 2804 Finished.

In the future, if you need to re-enter your login and password for PPPoE connections- select an item Internet connection:

We are already changing here login And password, press Apply/Save.
After setup, reboot the device with the new parameters. To do this, go to the section Control -> Reboot.

and wait until the device restarts. If you did something wrong and are in doubt - reset the device to factory settings and configure again. To reset the configuration to factory settings, go to the section Control -> Settings options -> Reset:

Configuring router parameters using the "Hardware Installation Wizard" program of OJSC Rostelecom:

download (.zip, 88.9 MB)

Many people are wondering how to set up a Rostelecom router with Wi-Fi.

In this article we have collected for you step by step guide to an action designed to repair or connect all the capabilities of the router from Rostelecom, namely: a modem and a Wi-Fi wireless computer network.

Features of connection via a router from Rostelecom

At the initial stage, when you are just choosing your future provider, take a close look at a company like Rostelecom. You should take into account the fact that this company provides access to Internet communications via a telephone line. Most people who don't have landline phones in their home use a type of network access called "over-the-air."

ADSL technology is the main property of the Internet from Rostelecom

What is the essence of this Internet connection? The main operating principle of this technology is asynchrony, that is, if we say in simple words, delivering a much smaller volume of signal speed. However, there are also such nuances as video calling, Email and a telephone operating over IP. The above types of communication are exceptions to the rule. When using them, the volume of information transmission speed and the amount of information are at maximum levels.

In order for the operation of web communications to be reliable, safe, and nothing could block telephone lines, experts in this field have created devices designed exclusively for these purposes. They are called splitters. On this moment Each user can purchase a splitter.

This device has one input and a pair of outputs. The input is used to operate telephone cables, which are pressed out before use via RJ-11, that is, a special connector. You need to be very careful when connecting cables so as not to get confused about what a particular hole is for.

It follows from this that when using splitters, the possibility of crossing frequencies and, consequently, overloading channels with extraneous information is completely eliminated.

However, please note that if a landline telephone has blocking capability, then the right decision will use not one, but several splitters in such a situation. In this case, one device should be located next to you, and the other should be with a person who lives next to you and is able to block the line.

If you have definitely decided to purchase a web connection from this particular company, then below we have prepared for you several instructions on how to set up a Rostelecom router.

Principles of cabling and hardware connection

The image below shows a diagram of how the Internet functions through a line of telephones. It is mandatory to use Internet modems that support wireless networks.

When connecting to the Internet, all kinds of modems usually use Modem type connectors, but not the same ones that are used in Phone. RJ-45 type network cables fit perfectly into any LAN port on a router. End number two must be connected to the network card personal computer. Now the only problem remains: how to configure the Rostelecom WiFi router.

Setting up the router

Just below we have selected for you an excellent guide on how to set up Rostelecom via a router using a router, which is designed following the example of the most popular modems of our time.

1. The first step before setting up any web communications device is to open the address bar in any browser (Chrome, Mozilla, Firefox, Yandex, etc.). Next, you need to enter the IP address of the device, which is 192.168.1.1.
2. The second action is to enter your username and password in the window that appears. If no one has changed the settings before you, then the login and password are admin. Click the "ok" button to save all the data.
3. Now you should have seen the functionality of the Wi-Fi router. First, we need a tab called INTERFACE SETUP - INTERNET. The provider gave you a special password and username name. This data must be entered in the column. Be sure to save all corrections.

Step-by-step wireless setup

To understand how to configure a Rostelecom router, you need to activate an existing Wi-Fi network. To do this, perform the following steps:

1. Let's move on to the section called Wireless Network, which you will find by clicking on the configuration tab.
2. The next step is to click on the red pencil icon. We are presented with a page on which we need to mark the line that contains the words enabled.
3. The third step is to select an authorization type called WPA/PSK so that no problems arise during further work.
4. On the line called SSID, enter the word that will be used to name your Wi-Fi network.
5. In the Pass Phrase column we write down our password from Wi-Fi networks. The key must contain at least 8 characters.

If you follow the instructions correctly, you will no longer have to worry about how to set up Wi-Fi router"Rostelecom", since the setup will happen automatically.

How to configure the F@st Rostelecom router

What to do in this case? Connecting this device model is as easy as installing any other type of Rostelecom router. First, let's repeat the same steps that we performed when setting up the router:

1. We go to any search engine and enter the device number in the address bar. You can find the device address on the surface of the router.
2. Next, an automatic message will be displayed with the columns “Username” and “Password”. Again we try to use the previously specified login and key, that is, the word admin.
3. If you enter all the data correctly, we will see the control panel for this router model.
4. On the site that opens we find a section called “Additional”.
5. Click on the “WAN service” panel. In it we must remove all active network connections. We perform this action by clicking on the “Delete” button
6. After this we add a new connection.
7. You will need to contact Rostelecom support at technical problems. The number for your region can be found on the official Rostelecom website. This step is necessary to clarify the data on VPI, as well as VCI. Having found out the exact parameters, click the “Save and Apply” column.
8. Our next action will be to switch to the “WAN service” and add another network. It indicates the type of connection. Most people use the “PPPoE” type. We come up with any name for the network and save all the changes again.

We hope you now understand how to configure a Rostelecom Sagemcom router. Nothing complicated.

How to set up a D-link Rostelecom router quickly

This type of router allows quick setup without unnecessary steps:

1. To begin, go again to the Rostelecom settings page, which is located at 192.168.1.1. In the “Username” and “Password” fields write the word Admin.
2. Now we can connect to the Internet in just a few steps using the Click’n’Connect program.
3. In the tab, select the PPPoE connection type that is already familiar to us and enter the password and login that you received when concluding an agreement on the provision of services by Rostelecom.

When you save all your changes, the device will try to connect to the provider's server. If everything is done correctly, you will be notified that the settings have been successfully completed. And now, everything is ready for unhindered use of the Internet via Wi-Fi, and you know everything about how to set up a Rostelecom router.

Rostelecom is currently the largest Internet provider in Russia, which is far ahead of its closest competitors and occupies a significant part of the Internet services market. The company's subscribers use the global network every day without going into technical details of their equipment settings. The need for such knowledge appears in the event of purchasing a more modern router or modem, as well as a complete collapse of the Windows system settings. Setting up Internet parameters from Rostelecom is, in fact, not some kind of super complicated process. Any user can carry it out without resorting to the help of the company’s technical specialists, especially since in most cases the call is paid. Setting up equipment for the Internet and creating a connection are decisive when a user first accesses the World Wide Web.

Internet setup by Rostelecom specialists

Rostelecom is not involved in self-production equipment for the Internet. In accordance with global practice, the Internet provider purchases a batch of equipment from Chinese manufacturers and uses it when connecting to global network.

When using some models of routers and modems, it is not necessary to configure them when connecting to the Internet. The equipment is delivered to subscribers already configured and all that is required is to connect to the Internet backbone.

When installing an unconfigured router, the client equipment will be configured technical specialist Rostelecom.

In general, the master must perform the following types of work:

• run a fiber optic cable into the room and connect it to the router;
• run an Ethernet cable from the router and connect it to the network connector of the computer;
• configure a PPPoE Internet connection;
• set up Wi-Fi signal distribution to offline devices and connect them to the Internet.

The ADSL modem is configured and connected by the subscriber independently or for a fee under a separate agreement.

If necessary, you can contact Rostelecom technical consultants by calling 8–800–1000–800. Specialists will not be able to configure your device remotely, but they can walk you through the entire process of connecting to the Internet step by step.

If the modem or router is purchased by the subscriber independently, then their connection is made for a fee in accordance with current tariffs.

Depending on the region, the types of paid work when connecting to the Internet from Rostelecom may be different and do not have a uniform tariff.

What equipment is needed for the Internet from Rostelecom, depending on the type of connection

To connect to the Internet from Rostelecom, you need to purchase and configure equipment. It can also be rented from a provider, with the right to later purchase. Depending on the connection technology, the composition of the equipment also changes.

Equipment for connection via telephone line

If you connect via a telephone line, you will need an ADSL modem.

Select and connect an ADSL modem to the network

ADSL modems different types connect to the Internet after installing a special filter called a splitter. It serves to separate the analog voice signal and the digital Internet signal, which allows you to use the telephone and the Internet at the same time.

Connect the splitter to the network in front of the modem

Video: connecting and setting up an ADSL modem

The modem must be equipped with a Wi-Fi device in order to be able to support multiple devices on the network.

Fiber optic connection equipment

When connecting via a fiber optic line, you will need a GPON modem.

Such a modem can combine the functions of Ethernet and a Wi-Fi router. If possible, it is best to immediately install a router to organize an intra-house network.

Purchase and connect a router to the network

It will help divide the Internet signal into several devices, such as a laptop, tablet, smartphone, TV, phone and others. Separation can be done via wires connected to the LAN connectors of the router or via a Wi-Fi connection. You can configure the router through any browser on the website standard settings, for example, 192.168.100.1.

Video: connecting to the Internet via fiber optic cable

Rostelecom uses several types of routers, with the manufacturers of which it has an agreement.

Equipment for connecting via Wi-Fi technology

When connecting via Wi-Fi technology to a private household, you will need a set of equipment.

As a rule, the kit is specified in the contract or on the website of the Rostelecom distributor.

Select necessary equipment to connect to the Internet

The kit includes:

• LTE antenna designed to receive a wireless Internet signal from a long-range access point;
• Wi-Fi router designed to receive and split the signal;
• adapters for wired connections;
• connecting cable for connecting the antenna to the router and internal wiring;
• wall mounts for cables.

Video: operating principle of equipment when connected via wireless technology

For Wi-Fi connections The apartment requires a router with a built-in radio module. It will distribute the signal between the user's wireless communication devices. The provider's cable is connected to the router and after configuration, the signal is transmitted using radio waves of a given range.

Equipment for connecting to the Internet using 3G and 4G technology

Internet from Rostelecom can also be connected with the support of 3G and 4G technology, if possible technical specifications. Networks are used for this connection mobile operator Rostelecom and LTE antennas. The connection is made using a special modem, distributed in USB format, equipped with a SIM card with a special tariff, or a portable device with a radio module.

Select 3G modem or 4G modem to connect to the Internet

The 3G modem can support speeds up to 3.4 megabits per second, and the 4G modem up to 30 megabits per second. In the future, the manufacturer promises an increase in speed to 1 gigabit per second.

Video: Rostelecom will provide Russia with 4G communications

Equipment for connecting to the Internet via television cable

If technical conditions in the region allow, then connecting to the Internet can be made using DOCSIS technology, using a television cable as an Internet signal conductor.

Rent a modem from Rostelecom

A modem for connecting via television cable can be rented from Rostelecom. This modem is equipped with a key built into the firmware. He doesn't need additional customization and immediately after connecting to the TV cable, it decodes the TV signal into an Ethernet signal.

Setting up a PPPoE connection on a computer

The PPPoE Internet protocol is used when connecting to a backbone network using Ethernet technology or a fiber optic line. This method has advantages such as extended spectrum additional features, compression of information when transmitted over Internet channels, carrying out authentication and encryption operations with information packets. Connection requires authorization on the global network, that is, entering the login and password values ​​obtained from the Internet provider. Used when making a direct connection to backbone network or to the provider's equipment.

Creating a PPPoE connection in Windows XP

Windows XP is gradually falling out of use and is no longer supported by Microsoft, but for older and low-power computers this operating system is still a real panacea for connecting to the global network. In order to connect to the Internet in Windows XP, you must perform the following operations:

1. In the “Control Panel”, click on the “Network Connections” icon.
2. In the network connections window, click on the “New Connection Wizard” icon.

   In the “Network Connections” panel, click on the “New Connection Wizard” icon

3. In the “New Connection Wizard” window, click the “Next” button.

   In the “New Connection Wizard” window, click the “Next” button

4. In the next window, select the “Set up a connection manually” radio button and click on the “Next” button.

   Select the “Set up a connection manually” switch and click on the “Next” button

In the connection type selection window, select the “Via a high-speed connection that requires a username and password” radio button and click the “Next” button.

Select the radio button “Via a high-speed connection that requires a username and password” and click the “Next” button

5. In the service provider name selection window, enter any name, for example, Internet.

   In the Service Provider Name field, enter any name

6. In the next step, enter the login and password values ​​​​issued by Rostelecom.
7. Check the checkboxes in all three boxes and click the “Next” button.

   Enter the login and password values ​​issued by Rostelecom

8. In the final window, click the “Done” button.
9. In network connections, double-click on the new connection.
10. In the console that opens, check the “Save username and password” line, and then click on the “Connection” button.

    Check the box next to “Save username and password” and click on the “Connect” button

11. The connection to the Rostelecom trunk line has been established.

Creating a PPPoE connection in Windows 7

To create a PPPoE connection in Windows 7, the following algorithm is used:

1. Click the left mouse button on the “Start” button.
2. In the expanded menu, click on the “Control Panel” line.

   In the menu, click on the line “Control Panel”

3. Click on the Network and Sharing Center icon

4. In the console that opens, click on the “Set up a new connection or network” icon.

   Click on the “Set up a new connection or network” icon

5. In the “Setting up a connection or network” console, select the block with the “Internet Connection” icon and click on the “Next” button.

   Select the “Internet Connection” block and click on the “Next” button

6. In the next panel, click on the “High-speed (with PPPoE)” block.

   In the console, click on the block “High-speed (with PPPoE)”

7. In the information entry panel, enter the user name and password issued by Rostelecom, any connection name and click on the “Connect” button.

   In the console, enter the username and password, as well as the connection name

8. An Internet connection is established.
9. In the final panel, click the “Close” button.

   In the final panel, click the “Close” button

10. PPPoE Internet connection is established.

Creating a PPPoE connection in Windows 10

To connect to World Wide Web When using the PPPoE protocol in Windows 10, you need to carry out a number of sequential operations:

1. Double-click the “Control Panel” icon on the desktop.
2. In the Control Panel, click on the Network and Sharing Center icon.
3. In the expanded aperture, click the “Create and configure a new connection or network” icon.

   In the console, click the “Create and configure a new connection or network” icon

4. In the “Setting up a connection or network” console, select the line with the “Internet Connection” icon and click on the “Next” button.

   In the console, select the line with the “Internet Connection” icon and click on the “Next” button

5. In the “Internet Connection” console, click on the “High-speed (with PPPoE)” tab.

   In the “Internet Connection” console, click on the “High-speed (with PPPoE)” tab

6. In the subsequent console, enter the login and password values ​​received from your Internet provider and click on the “Connect” button.

   In the console, enter the login and password values ​​received from your Internet provider and click on the “Connect” button

PPPoE connection is established.

Video: how to connect and configure a PPPoE connection

Permission to use the connection to other users should be given only during installation home internet, since the number of users is limited and precisely known.

Setting up a connection via a router

The router can be configured automatically or manually. It depends on what type of router will be used when connecting to the Internet.

Automatic router settings

If the router has already been configured by Rostelecom specialists, then after connecting to the network you only need to create a new Internet connection on your computer.

If the router is not configured, then you need to automatic setup . This can be done in two ways:

1. Using a special installation disk.
   
2. Using the "Setup Wizard".
   

If you encounter any difficulties during setup, you can always call the Rostelecom technical support service and get advice on setting up the equipment.

Manual router setup

To configure the router manually, you must perform the following steps:

1. After connecting the router to the computer, launch any browser.
2. Enter the IP address specified in the router setup instructions in the address bar field. Typically this is 192.168.0.1, 192.168.1.1 or 192.168.100.1.
3. The router configuration console will open.
4. Enter the values ​​admin and admin or root and admin in the login and password fields.

   In the settings console, enter your username and password to log into the site

In the connections panel, click on the WAN tab.

Set the type of PPPoE connection to use. You can first check the type of connection with your provider.

On the WAN tab, set up a PPPoE connection

Enter a fictitious name for the connection. You can choose any name, for example, Rostelecom.

5. Go to the WLAN tab.

Enter the created username and password to log into the network. The login and password can be issued by Rostelecom. Then you don’t need to invent anything.