Controls
Charger
- Before first use, you must fully charge the mini camcorder's battery. This can be done by connecting the Wi-Fi Mini camera to the PC using the USB cable included in the package.
- To fully charge the battery, 60-85 minutes are enough.
- This model is capable of broadcasting/recording video while charging, which allows it to be used around the clock.
Free apps
To view the broadcast from a mini camera, you need to download and install a free application on your smartphone/tablet or a program on your PC/laptop. Find software available on the website www.scc21.net
P2P mode (Broadcast "directly")
Perform all settings without a memory card. (After connecting and setting up the camera, you can insert the card)
WIFI (P2P) – connection “directly”. In this Wi-Fi mode, the mini camera generates wireless Wi-Fi network with the name “MD81S”, by connecting to which you can view online video from the camera, as well as record broadcasts and take photos. At the same time, the distance between miniature camera and the device can reach 10-15 meters.
- We connect the camera to the network or a portable battery. ( If the camera is charged, then simply turn it on. We recommend that all settings be made while connecting to a power source.)
- Move the Mode switch to the P2P position. Then turn on the camera by moving the Power switch to the ON position.
- Wait 20-30 seconds. for the "MD81S" network to appear in the list of wireless networks and connect to it, password for connection: 12345678.
- Go to the program to view the broadcast, select the LAN section and click on the broadcast that appears.
The broadcast can be viewed in full screen mode. If desired, you can connect up to 4 MD81S cameras to simultaneously view the video stream from all cameras.
At the bottom of the screen there are “photo” and “video” buttons, when clicked you can take photos and record broadcasts. In addition, there is a motion sensor setting, E-mail notifications when sensors are triggered, image brightness/contrast and much more.
Connecting a camera for remote access (broadcast via Internet)
Select P2P mode and turn on the camera, after the network appears, connect to it (password for connection: 12345678 ):
Go to the application, in LAN mode go to the camera settings:
Select "Wi-Fi" and click on the "Use wifi" button. In the window that opens, you must enter the name of your wireless network, as well as the password for it.
Click "Ok" and wait 10 seconds.
Turn off the mini camera by moving the Power switch to the OFF position; if connected to the network, turn it off. Move the Mode switch to the AP position. Turn on the mini camera by moving the Power switch to the ON position.
Wait 20-30 seconds and connect to your wireless network.
Go to the application on your device to watch the broadcast. Select the WAN section and click the "Register" button. In the window that appears, you must enter the camera ID and password from the back of your wi-fi mini camera, as well as your E-mail.
Now you have the opportunity to view the broadcast from the camera from anywhere in the world by simply logging into the appropriate application on any device. It is also possible to remotely record the broadcast, take photos, activate the motion sensor function from setting up E-mail alerts, adjust image brightness/contrast and much more.
Charger
- Before first use, you must fully charge the mini camcorder's battery. This can be done by connecting the Wi-Fi Mini camera to the PC using the USB cable included in the package.
- To fully charge the battery, 60-85 minutes are enough.
- This model is capable of broadcasting/recording video while charging, which allows it to be used around the clock.
Video recording
Long press the On/Off button to turn on mini video camera Q7. By default, the camcorder turns on in video recording mode, the red and blue indicators will light up, and then the blue indicator will turn off and the red indicator will remain on. Press the On/Off button again to start recording video, the red indicator will blink slowly. Every 10 minutes mini video camera will automatically save the video. To stop recording, press the On/Off button again, and the red indicator will stop blinking. If the red and blue indicators are constantly blinking, it means that the memory card is missing or cannot be read.
Photographing
While in Video mode, press the Mode button to enter Photo mode, the blue indicator will light up. To take a photo, press the On/Off button, the blue indicator will blink - the photo has been saved.
Voice recorder mode
While in Video mode, press the Mode button mini video cameras 2 times to enter Voice Recorder mode, the red and blue indicators will light up simultaneously. To start recording audio, press On/Off, the blue indicator will be lit constantly and the red indicator will blink.
Motion sensor
To activate the motion sensor mini video cameras, while in Video mode, hold down the On/Off button for 2 seconds to enter Motion Sensor mode, the red indicator will be constantly on, and the blue indicator will blink in anticipation of movement. Audio recording will start automatically when motion is detected in front of the lens mini cameras Q5.
Reset settings
To reset settings mini cameras Q5 press and hold the On/Off button until the camera restarts.
PC connection and charging
To transfer data to PC and charge, connect mini camera Q5 to the USB port of the PC. The mini video camera is defined as a storage device. During charging, the blue indicator will blink; when the camera is fully charged, it will light constantly. Charging mini cameras can also be carried out using a charger from a 220V network.
Setting the date and time
· Connect mini camera to PC. Create a text file in the root directory of the camera named TIMERSET CD.txt with content like: YYYYMMDD HHMMSS Y or N (to display the time stamp on the video)
· For example, if today is October 5, 2011 and the time is 12 hours 30 minutes and you do not want the time stamp to be displayed on the video, then you need to create a text file TIMERSET CD.txt with the content 20111005123000 N, save it and copy it to the root directory of the camera.
Webcam Mode
Press and hold the Mode button and connect the mini video camera to the PC. The camera will be defined as a standard Webcam.
Turn on the mini camera and select the desired mode: video recording, voice recorder or camera. Press and hold the Mode button for a few seconds, the yellow LED will light up, which means the night light is on. Likewise, to turn off the night light, press and hold the Mode button.
Free apps
To view the broadcast from a mini camera, you need to download and install a free application on your smartphone/tablet or a program on your PC/laptop. You can find the software on the website www.scc21.net.
Connecting the camera directly to a smartphone or laptop
Perform all settings without a memory card. (After connecting and setting up the camera, you can insert the card)
In this Wi-Fi mode, the mini camera generates a Wi-Fi wireless network called “Q7”, by connecting to which you can view online video from the camera, as well as record broadcasts and take photos. In this case, the distance between the miniature camera and the device can reach 10-15 meters.
- We connect the camera to the network or a portable battery. (If the camera is charged, then simply turn it on. We recommend that you perform all settings while connecting to a power source.)
- Turn on the camera by moving the Power switch to the ON position.
- Wait 30-60 seconds for the “Q7” network to appear in the list of wireless networks and connect to it.
- Go to the program to view the broadcast, select the LAN section and click on the broadcast that appears.
The broadcast can be viewed in full screen mode. If desired, you can connect up to 4 cameras to simultaneously view the video stream from all cameras.
At the bottom of the screen there are “photo” and “video” buttons, when clicked you can take photos and record broadcasts. In addition, there is a motion sensor setting, E-mail notifications when sensors are triggered, image brightness/contrast and much more.
Connecting a camera for remote access (broadcast via Internet)
Turn on the camera, after the network appears, connect to it:
Go to the application, in LAN mode go to the camera settings:
Select "Wi-Fi" and click on the "Use wifi" button. In the window that opens, you must enter the name of your wireless network, as well as its password.
Click "Ok" and wait 10 seconds.
Turn off the mini camera by moving the Power switch to the OFF position; if connected to the network, turn it off. Move the Mode switch to the AP position. Turn on the mini camera by moving the Power switch to the ON position.
Wait 20-30 seconds and connect to your wireless network.
Go to the application on your device to watch the broadcast. Select the WAN section and click the "Register" button. In the window that appears, you must enter the camera ID and password from the back of your wi-fi mini camera, as well as your E-mail.
Now you have the opportunity to view the broadcast from the camera from anywhere in the world by simply logging into the appropriate application on any device. It is also possible to remotely record a broadcast, take photos, activate the motion sensor function with setting up an E-mail alert, adjust the brightness/contrast of the image and much more.
1. Connect the IP camera with the included power supply to the electrical network, connect the Internet cable to the router or hub. In the future, you can connect via Wi-Fi, but for the first time it is better to use a wired connection.
2. Install software for working with the camera.
You can download the archive of programs from the supplied disk from our website
You can download the archive with a player for viewing video from cameras from our website
For mobile devices(tablets, smartphones) you can use the program E-view7 as well as an alternative program IPCVIEW - For older WXH, HWAA camera series
For New Camera Series ZZZZ and newer, released from July 2018 must be used new program for mobile devices WANSCAM
To work on The computer needs to use a new version of the PC client optimized for ZZZZ and newer, you can download by
Attention!!! New cameras in old program DO NOT WORK, for different types cameras you need to use BOTH programs!!!
For new K series cameras - software information!!!
SAP HD mobile application - other does not work - download
For Windows computer a universal application has been released Perfect IP Camera Viewer - This application is suitable for 90% of Vanscam cameras (the exception is the solar cell K series models)
You need to understand that your camera can operate in two modes:
A is a local network (it is generated by your router and the IP camera is located in the same room as your computer). Example: you have a router at home, a camera is connected to it, and a computer from which you access the Internet and control the camera. In this case, you can control the camera using an Internet browser and the Wanscam program.
Launch the utility Search tool, press Find and we see our camera in the list of devices Cameras. Select it and click on the bottom right Open. Next you will be asked to open the camera in your browser, we agree to Internet Explorer we install add-ons and the program oPlayer, it is on disk.
In browser mode there are a lot of basic camera settings; you can change the brightness and contrast and other settings.
You can also use the program on the local network Wanscam, which is located on the disk in the folder PC IE View. In local network mode it works very simply. Enter the top menu System further Device List press Open search tools a list of our cameras opens, click Searching and we see our camera in the list of devices. Click on it and it appears on the right of the list of cameras on the main page of the program. All we have to do is select it, click the checkbox and close the initialization menu, and enjoy the picture from the camera.
B - we want to log in from an external network (another computer, tablet, smartphone not connected to your router, another city, country). In this case, to work in the environment Windows Only the Wanscam program will help us and very useful property our camera - P2P address, which allows you to connect to an IP camera from anywhere and absolutely not think about any Internet settings.
Camera name (any), password and login (by default User Name: admin Password: leave the field free).
For cameras of new revisions with Onvif support (User Name: admin Password: admin)
Choose Video mode (this is important!!! If installed incorrectly, there will be no image!!! ):
- jpeg stream is for simple video cameras with a resolution of 640x480,
The other two modes are for 1280x768 HD cameras.
In the field ID enter P2P the address of our camera, it is on the box or on the camera itself.
To set up the camera from a tablet or smartphone, everything is much simpler, the kit includes a coupon with a QR code for the program for iOS or android systems. Just scan the coupon with a QR scanner and the program will install itself on your gadget. You can install the program E-View7-This program is recommended by Wanscam and is very easy to set up. You can download it from Play Market or App Store. After that, connect the camera to the router. Launch the program E-View7, add a new camera, scan the QR code of your camera Id number, it is on the bottom of the camera itself or on the box, or enter the id manually. The camera is added to the list of available devices. And you can enjoy the image from your camera anywhere on the screen of your smartphone or tablet. Given that stable internet on both sides.
Possible errors that the program will generate if the connection or data is entered incorrectly:
1. Password and login error - you enter the password or login incorrectly, if they are lost or forgotten, you need to reset the settings to factory defaults by pressing and holding the Reset button for 10 seconds.
2. P2P address error - you entered the address incorrectly, carefully read it on the box or on the camera.
3. No image - the video stream (video mode) is not selected correctly, check the connection to the camera.
4. The camera is overloaded 1-2 times during the day, testing occurs, the position is lost. (this is a reboot and clearing of the cache memory, can happen 1-2 times a day). If you need the camera to return to the configured position, there is a PTZ function for this. There you can select up to 16 settings for the camera position, after a reboot the camera will return to setting No. 1.
5. No image in the browser (black screen). A. Plugins are not installed, install add-ons. b. Right-click on the screen and select Direct Draw video mode instead of DirectX
6. The image from the camera is black and white, the IR illumination relay constantly clicks. It is necessary to change and select the light setting at which the IR illumination turns on. Basically this value is 650. Go to the browser, settings menu, image setup. Next we see the IR illumination settings, enable, disable and auto. Below is the illumination setting from 0 to 1024. Enter the number 650 and save. If it doesn’t work, then select the desired value.
The Wi-Fi connection is made through the Wanscam program, or in a browser, the setup takes place on the local network. To do this, you need to make a wired connection, find the wireless connection mode in the menu wi-fi, catch the router, enter the password, select the option to use a Wi-fi connection and click OK. Now you can disconnect the camera from the wired connection - it will connect to the wireless one automatically if the password to the router is correct. Sometimes the camera does not connect to the router the first time and you have to click OK several times, install and update.
If your camera is HD and supports One Key Setting, for example HW0049 then setting up a Wi-Fi connection to your router will take no more than two minutes.
1. Download latest version programs E-View7 to your smartphone.
2. Turn on the camera for the first time. Connecting the power adapter. The melodious sound of Ding-Ding-Ding is heard. If it is not there, then connect the adapter and press RESET from the bottom of the camera, holding it for 10 seconds until the signal sounds.
3. Launch the program on your smartphone, click in the upper right corner + add camera. Next at the bottom is the One key setting option, click.
4. Enter the name and password of your router, the exact password without errors. And click Start configuration.
5. We wait 1 minute, the camera connects itself to your router, at the end there is a melodious sound, the camera should appear in the list of devices, you can use it.
There are more on disk detailed instructions to set up a camera for a smartphone on Android and Apple io systems.
If you have any problems with camera installation and configuration, we will help you, write or call us.
Loading...
