Cashless payment
Pickup, Delivery by courier, Delivery by mail, 1 more way, Delivery by transport company
Fireman's crowbar PSh with a ball head has a simple design and purpose. It is used to upholster plaster and chip ice from the lid of a hydrant well. This crowbar is also used to clear fire sites, open roofing, sheathing, etc. This is an indispensable tool for any fighter against an uncontrolled fire. It is very convenient for breaking doors, stained glass, glass and other obstacles on the way to saving human life.
Characteristics
The crowbar consists of a round rod and a ball at its upper end.
The diameter of the crowbar is 50 mm,
The diameter of its flat cut is 25 mm.
Looking at its lower end, you can see sharpening into two edges, the blade width of which is 12.5 mm.
A fire crowbar is a non-mechanized fire fighting tool.
Its overall dimensions:
Length: 1000 mm.
The scrap has a mass of no more than 5 kg;
The metal has a thickness of 25 mm.
Scope of application
The crowbar is used as a lever, which helps break into structures with a fairly tight connection. There are several types of fire crowbars:
Heavy fireman's crowbar (Difference: curved upper part. Used to perform lever work, opening doors and structures);
Fireman's ball crowbar (Difference: round rod. Use it to break ice, upholster plaster);
Universal fireman's crowbar (Difference: bent upper steel parts. Used in emergency situations to urgently open doors and windows);
Light fireman's crowbar (Difference: bent tetrahedral upper part with a ring for suspension and the same, but flat lower part).
Every firefighter's tool has the power to prevent someone's death. And even such a simple weapon as a fireball crowbar will help you penetrate a burning building, eliminating all obstacles in your way. If a child is imprisoned alone in a house engulfed in fire, then it is impossible to get to him without a crowbar, which will help open the door, break the window and save him. The fire ball crowbar is suitable for any rescue work in a variety of environments. This functionality is determined only by the strength of the material from which it is made and the skills to work with it.
Scrap is a hand tool that is one of the ancient devices of mankind. Impact and lever work was performed using a crowbar. In ancient times, a device similar to a crowbar was used for arranging caves (dwellings), clearing small rubble from stones and rolling them. In ancient times, a crowbar was a wooden crowbar with a sharp end; a sharp stone was tied to one end, and the crowbar became a hunting tool. With the discovery of metals and the development of blacksmithing, crowbars began to be made from metal, which improved its quality and expanded the range of work performed with its help.
Fire crowbars or entrenching tools are indispensable assistants when performing various works in case of fire and accidents. Varieties of crowbars include the following types:
- Fireman's light scrap (LPL);
- fireman's heavy scrap (LPT);
- universal fireman's crowbar;
- Fireman's ball scrap (LPSh).
Light (LPL)
It is used when dismantling light structures in a fire, opening roofing material, cladding buildings and similar work.
The crowbar itself is an all-metal cylindrical base 1.1 m long, weighs only 2.5 kg and has a diameter of 25 mm. The upper part of the rod is bent at an angle of 45° and sharpened along four edges.
For convenience and descent from a height, there is a metal ring for hanging on the upper edge, the width of the hook.
With ball head (LPSh)
It is used for removing building coatings by upholstery, removing ice from covers in places where fire-prevention water pipes are located.
The LPS crowbar is an all-metal cylindrical base with a diameter of 50 mm, at one end of which there is a thickening in the form of a ball; the opposite end of the crowbar is sharp, sharpened into two edges and 12.5 mm wide. The length of the scrap is 1.0 m, weight no more than 5 kg.
Heavy (LPT)
A heavy fireman's crowbar (HLC) is used when carrying out lever work with little effort when dismantling floor structures, plank trusses, partitions, as well as for uncorking doors.
The crowbar looks like an all-metal cylindrical base with a diameter of 28 mm. The upper part looks like a hook sharpened on four sides, the lower part looks like a tip sharpened on two sides. Distinctive feature scrap is its high strength, the weight of the product is 5 kg, length is 1.1 m.
Universal health care facility
(for doors and windows)
It is used when carrying out work on opening windows and doors. The crowbar consists of a solid metal rod with two bent ends.
This crowbar is usually used for leverage during rescue work and dismantling of structures. Scrap length 600 mm, weight – 3 kg.
Technical requirements
According to section 5 normative document the following requirements apply:
The mechanical properties of scrap metal must be no lower than those of steel 45 according to GOST 1050.
Rest metal parts tools should be made from carbon steel according to GOST 1050 or GOST 380.
Tests should be carried out in accordance with the requirements of paragraph 7.5 of the above described GOST.
The pointed working parts of the tool must be sharpened and then heat treated to a length, mm, not less than:
- 60 – for hooks, hooks, bent ends of crowbars and ax picks;
- 150 – for straight ends of crowbars;
The hardness of heat-treated tool ends is 48-54 HRC.
Indicators of the purpose of the universal tool kit:
- the maximum bending moment when working with any replaceable working element, except for the hook, is not less than 785 Nm;
- maximum tensile force when working with a crowbar-hook or hook - not less than 1960 N;
Same day delivery is possible throughout Moscow and the region, when placing an order at any time working hours. Check with your manager for details. The cost of delivery to the regions is determined by tariffs transport companies. The company primarily works with the PEK company, but can carry out delivery by any other transport company convenient for the customer. Delivery time in Moscow is 1 day after order confirmation.
When paying through payment systems, through a bank - your order is delivered only after receipt cash on R/S. Delivery to regions is paid. Delivery is paid by the buyer to the transport company. The delivery cost indicated in the forwarding invoice is the cost of delivery from Moscow to your or a nearby city in which there is a branch of the transport company and does not include the cost of targeted delivery within the city and beyond. The company sends its products to the regions only in assembled form. Before shipping your chosen product, it is assembled, checked, configured, and undergoes pre-sale preparation. This is due to the fact that the company cannot be held responsible for products assembled and configured by the buyer himself. There is a high probability that you may incorrectly assemble and configure the product you purchased, which can lead to serious damage in the future. Sending is carried out by transport companies. You can calculate the approximate cost of delivery to your city on the websites of transport companies or obtain information from the manager by phone or mail. When paying through payment systems, through a bank, your order is delivered only after funds are received on your account. The calculation of delivery costs on the website is for informational purposes only. The actual shipping cost may differ from the estimate on the website. When the cargo is delivered, it is weighed and measured. Listed above are the main transport companies through which we can send goods. We give our preference to the transport company PEK, because it is one of the largest, with branches in many cities. Delivery to the transport company's terminal is carried out 1 business day after receipt of funds for the goods at the Company's account. If you require urgent shipment, you can order a pick-up service from our warehouse from your chosen transport company. The company only carries out delivery to the terminal of the transport company and its transfer to the transport company. After pre-sale preparation, the device is photographed from all sides and packaged according to the packaging option you choose. Photographed after packaging. Next, your goods are delivered to the transport company’s terminal and sent with lathing to the address you specified. The next day they will be sent to you by email photos and shipping invoice. Lathing is a service provided by a transport company. The cost of this service can also be calculated on the websites of transport companies. When receiving the cargo at the shipping center, be sure to open the packaging and check the goods; upon delivery, open it in front of the driver. There are more and more cases when the transport company, after damage to the cargo, repacks the cargo, and you pick it up in full confidence that everything inside is intact. Once you have signed the documents and received the cargo, you will not be able to make a claim.
Loading...
