We always present on our website a large number of latest current vacancies. Use filters to quickly search by parameters.
For successful employment, it is desirable to have a specialized education, as well as possess necessary qualities and work skills. First of all, you need to carefully study the requirements of employers in your chosen specialty, then start writing a resume.
You should not send your resume to all companies at the same time. Choose suitable vacancies based on your qualifications and work experience. We list the most important skills for employers that you need to successfully work as a metalwork assembler in Moscow:
Top 7 key skills you need to have to get hired
Also, quite often, vacancies contain the following requirements: construction and installation work, responsibility and work experience.
As you prepare for your interview, use this information as a checklist. This will help you not only please the recruiter, but also get the job you want!
Analysis of vacancies in Moscow
Based on the results of an analysis of vacancies published on our website, the indicated starting salary, on average, is 46,368. The average maximum income level (indicated “salary up to”) is 64,061. It must be borne in mind that the figures given are statistics. The actual salary during employment can vary greatly depending on many factors:- Your previous work experience, education
- Type of employment, work schedule
- Company size, industry, brand, etc.
Salary level depending on the applicant’s work experience
February 19, 2020 - Responsibilities: - carry out operations for assembling metal structures - produce parts from long and sheet metal - mark parts according to templates - install bolts and studs - assemble simple components of metal structures for welding and riveting - ...
February 6, 2020 - Responsibilities: Assembly of metal structures according to drawings; Requirements: Secondary technical education; Experience in assembling metal structures according to drawings is required; 5-6 category; Conditions: Official employment, decent salary...
February 14, 2020 - Responsibilities: Assembly of metal structures according to drawings and diagrams Requirements: Skill in reading drawings. Experience in assembling metal structures in a workshop environment. Responsibility, desire to work and earn money. Conditions: Employment in accordance with the Labor Code of the Russian Federation! Removable...
February 20, 2020 - Responsibilities: Assembling construction equipment Delivery of quality control products Be able to work semi-automatically (assembly with tacks) Requirements: from 4th category, at least 3 years of experience Conditions: Employment in accordance with the Labor Code of the Russian Federation, wages twice a month, strictly without delays. ..
January 27, 2020 - Responsibilities: Assembling MK according to drawings Conditions: The company requires a mechanic to assemble MK, work according to the shift schedule in the Moscow region Shift 60/30, six days work week 11 o'clock; Accommodation in an apartment (living conditions are good); Employment...
February 18, 2020 - Responsibilities: Knowledge of drawings, assembly of micro-air cooling units, installation of a washing system, assembly of blinds. Conditions: The company requires work on a shift schedule in Voronezh region and in the Republic of Mordovia Shift 60/30, six-day work week...
February 6, 2020 - Responsibilities: assembly of metal structures Requirements: possession of a qualification certificate from category 4 ability to read drawings Conditions: Work in the Tula region Shift 60/30 or 45/15 Direct employer Comfortable housing at the expense of the employer...
February 7, 2020 - Svyazstroydetal company is a leader Russian market for the development and production of couplings for fiber-optic communication cables, one of the largest players in the market of optical cross-connects and optical cords, has a modern technological park...
February 3, 2020 - Responsibilities: Assembly elevator equipment according to drawings Requirements: knowledge of the basics of electrical engineering and electromechanics ability to read drawings (diagrams) experience in the installation of elevator equipment Conditions: Work on a time-based bonus basis Work at an enterprise, ...
February 7, 2020 - Qualification requirements, approvals, required experience: education in specialties: installation and assembly of metal structures, installation technological equipment and related structures, installation process pipelines, mechanic for repairing technological...
February 10, 2020 - Responsibilities: disassembly, repair, assembly of metal structures medium difficulty; repair and adjustment of hand tools; installation and dismantling of inventory and non-inventory scaffolding; production of wooden floorings. Requirements: secondary education,...
February 19, 2020 - Responsibilities: execution mechano assembly work in accordance with the design documentation; assembly of components, installation of metal structures. Requirements: Reading drawings (required); Experience in assembling MK, Conditions: Work outside the employer's territory; ...
February 6, 2020 - Responsibilities: Assembly of metal structures according to drawings; Requirements: Secondary technical education; Experience in assembling metal structures according to drawings will be your advantage; Conditions: Official employment; Decent white salary...
February 17, 2020 - Responsibilities: assembly of metal structures Requirements: 4-6 category ability to read technological drawings. Necessarily! 3 years of work experience, availability of valid certificates Conditions: Work on a rotational basis in Podolsk Shift 60/30 days Accommodation...
February 3, 2020 - Responsibilities: execution preparatory work for the assembly of metal structures, unloading and loading work in the workshop, working with hand-held power tools, metal processing and equipment assembly, carrying out instructions from the production manager, observing labor...
February 13, 2020 - Responsibilities: Assembly radio-electronic equipment; Carrying out assembly work; Assembly of metal structures. Requirements: Secondary specialized education, higher education. Reading ability design documentation; Knowledge of basic electronics, electrical engineering, ability...
February 12, 2020 - Responsibilities: Organizing the operation of the machine; Checking the quality and accuracy of manufactured parts; Manufacturing of parts (cutting and bending) on machines; Assembly of metal structures (wheelchairs, test benches); Other work in the workshop; Keeping it clean...
January 30, 2020 - Responsibilities: performing preparatory work for the assembly of metal structures, unloading and loading work in the workshop and on construction site- work with hand-held power tools, metal processing, assembly and installation of metal structures, carrying out assignments...
January 30, 2020 - Responsibilities: Assembly of metal structures according to drawings; Complete shift assignments in full; Requirements: The ability to read drawings for the assembly of metal structures is a MUST! Experience working with metal structures; The desire to work and earn...
February 7, 2020 - Responsibilities: Assembly of metal structures (in the workshop and on-site). Requirements: - Education not lower than secondary; - Responsible, technically competent; - At least 1 year of experience (working with metal structures). - Reading KM, KMD drawings is welcome; ...
February 7, 2020 - Required work experience: not required Full time, shift work PIC-Element - new production company, for the production of sanitary modules (ready-made bathrooms), within the PIK Group of Companies, the largest developer in Moscow and the Moscow region...
February 7, 2020 - PIK-Element is a new production company for the production of sanitary modules (ready-made bathrooms), within the PIK Group of Companies, the largest developer in Moscow and the Moscow region. Required work experience: no experience possible, willing to train. We invite you...
February 6, 2020 - Responsibilities: Assembly of metal structures according to drawings; Requirements: Secondary technical education; Skills and Experience: Ability to read construction drawings; 3-4 category; Conditions: Piece wages; Education; Official employment, decent...
January 29, 2020 - Responsibilities: - Assembling metal structures according to drawings Requirement: - Having a record in work book- Ability to read drawings Conditions: - 60/30 shift - 6/1 schedule for 11 hours - We provide free accommodation - Official employment - Full...
January 27, 2020 - Dear applicant! We look forward to having you on our team if you are a professional in your field! AllianceTelecommunications LLC - implements complex projects in the field of civil works, engineering systems, communications, telecommunications and security...
February 10, 2020 - Production division Fire Drop company invites you to permanent job Manager / Head of Production What we produce: Ground-mounted metal quick-collection tanks for storing fire-fighting water supplies. Collapsible tanks...
February 19, 2020 - Contact person: Alena Sergeevna Yukhimenko What we expect from you: The largest machine-building enterprise supplying equipment for the nuclear and petrochemical industries requires an assembly mechanic. Responsibilities: Disassembly, repair...
January 30, 2020 - Your main tasks: - Assembly of metal structures according to drawings; What we expect from you: - Secondary technical education; - Experience in assembling metal structures according to drawings is required; - 5-6 category; We offer: - Official employment, decent...
February 21, 2020 - Contact person: Tatyana Aleksandrovna Requirements for the candidate: Responsibilities: Assembling elevator equipment according to drawings Requirements: knowledge of the basics of electrical engineering and electromechanics ability to read drawings (diagrams) experience in the installation of elevator equipment...
February 2, 2020 - Assembly of metal structures for welding and riveting according to drawings and sketches Contact person: Ermolova Margarita Requirements: Official work experience in the specialty, availability of a qualification certificate. Additional Information: Quota for 2019ResponsibilityDiscipline...
January 27, 2020 - Contact person: Evgeniya Requirements for the candidate: The DON company requires a “QMS mechanic” to work on a rotational basis at large enterprises of the Russian Federation. Responsibilities: working with templates, marking parts according to them;
drawing up sketches and assembly diagrams;
Creation...
February 7, 2020 - Qualification requirements, approvals, required experience: education in specialties: installation and assembly of metal structures, installation of process equipment and related structures, installation of process pipelines, repair mechanic...
January 26, 2020 - A manufacturing and trading company requires a mechanic for mechanical assembly work for production. Your responsibilities: - performing preparatory work on assembling metal structures - unloading and loading work in the workshop - working with hand-held power tools - ...
February 18, 2020 - Contact person: Natalya Valerievna Our expectations: Responsibilities: URGENTLY required MK assemblers (you can have a team with welders at P/A) Welding, assembly of cranes. Conditions: Work schedule 60/30 days. They work 11 hours a day. 6/1 days. We provide...
February 3, 2020 - On large enterprise For the production of metal structures and boiler equipment in the Moscow region (Kashira, Podolsk), experienced MK assemblers are required. Our requirements: -work experience from 1 year; -Ability to read blueprints is a must!!! Officials...
February 11, 2020 - Fitter aircraft JSC Scientific and Production Association named after. S. A. Lavochkina, an enterprise of the Russian rocket and space industry, offers to join a highly professional team of specialists with a unique...
January 29, 2020 - Tasks: - Assembling a metal structure according to drawings Requirement: - Having an entry in the work book - Ability to read drawings We offer: - 60/30 shift - Schedule 6/1 for 11 hours - We provide free accommodation - Official employment - Full social.. .
January 28, 2020 - Your responsibilities: - Assembly of metal structures according to drawings; What we expect from you: - Secondary technical education; Skills and experience: - Ability to read construction drawings; - 3-4 category; Working conditions: - Piecework wages; - Education; - Official employment, ...
January 27, 2020 - Dear applicant! We look forward to having you on our team if you are a professional in your field! AllianceTelecommunications LLC - implements complex projects in the field of civil works, engineering systems, communications, telecommunications and security...
January 26, 2020 - Contact person: Danila Vasilievich Blinkov Our expectations: Responsibilities: Assembly of metal structures for welding;
Editing parts and assemblies;
Cleaning of seams and surfacing after welding. Requirements: Minimum 3 years of experience as a fitter; Reading technical...
« February 6, 2020 - - working with templates, marking parts using them; - assembly of structures; - creating holes for connecting parts; - checking elements for defects and eliminating them. Contact person: Evgenia Valerievna Kabanova Our requirements: - Secondary education... Receive notifications by email. mail about
metalwork assembly mechanic
» in the Moscow region
Email mail
SubscribeThe minimum earnings for the current request are fixed at 25,000 rubles. Over the past month, there have been 0 requests on the site for vacancies for mechanics assembling metal structures. There are 2 vacancies presented in all regions of the region. When applying for a job, pay attention to the leaders in the number of vacancies:
Distribution schedule for vacancies “metal structure assembly mechanic” by salary
- "Stroykom M";
- "Russian Labor Resources";
- "UralStaffCompany";
It is important that the data presented is relevant for the following region: Moscow region. Metal structure assembly mechanic is the full name of this specialization according to the job directory of this region. Among other cities in the region where specialization as a mechanic in the assembly of metal structures is in demand, the following should be mentioned:
Median salary for the vacancy “metal structure assembly mechanic” in other cities
- Catchers
- Matyra
- Lukhovitsy
- Nizhnemaslovo
- Mukhino
The average income level in the specialty is 38,600. The group also includes the following vacancies:. At the request of the specialty mechanic for assembling metal structures, the median monthly salary is 39,000 rubles. The maximum salary is 55,000 rubles. If not suitable vacancy metal fabricator now, she may show up in a couple of days. In a place like Moscow there will be work! The profession of metalwork assembly mechanic is practically synonymous with this specialization and means the same requirements for the candidate. The search for vacancies for mechanics assembling metal structures is carried out in the category. The most popular forms of employment are “full-time”, “full-time”, “full-time”. “Fitter for assembling metal structures” is a fairly sought-after position in Moscow. There are 5 vacancies for the most popular form of employment. List available vacancies: Moscow. There are 804 vacancies for “metal structure assembly mechanic” throughout the country. Other popular vacancies in the Moscow region:
- “Fitter-assembler, installer of metal structures”;
- "Metal structures assembler";
- “Mock assembly mechanic (Norilsk)”;
- “Fitter-assembler of metal structures, metal doors”;
- "Brigade of welders and fitters."
IN general list the request page for a vacancy for a mechanic for assembling metal structures reaches 0 positions. According to our data, the three most popular meanings of the form of employment are “full-time”, “full-time”, “full-time” (the most popular is full-time). Wage in employer vacancies is 39,000 rubles. In total, there are currently 44 vacancies for this profession in the Moscow region. The total number of vacancies in this category is 361 positions.
Unified Tariff and Qualification Directory of Works and Professions of Workers (UTKS), 2019
Part No. 2 of Issue No. 2 of ETKS
The issue was approved by Resolution of the Ministry of Labor of the Russian Federation dated November 15, 1999 N 45
(as amended by Order of the Ministry of Health and Social Development of the Russian Federation dated November 13, 2008 N 645)
Metalwork assembly mechanic
§ 139. Mechanic for assembling metal structures, 2nd category
Characteristics of work. Manual chopping and cutting of wire, sheet and long metal blanks. Filing and deburring. Participation, under the guidance of a more highly qualified mechanic, in performing certain simple and medium-complexity works and operations for assembling metal structures and testing them. Manufacturing of simple parts from section and sheet metal. Marking parts according to simple templates. Drilling and cutting threads manually using taps and dies. Alignment of racks for assembly. Installation of bolts and studs into compatible holes in metal structures. Assembly of simple components of metal structures for welding and riveting according to drawings and sketches using universal assembly and special devices. Tack welding of parts during assembly using electric welding. Drilling, reaming and reaming holes of small parts according to markings on a machine and portable power tools. Editing parts and assemblies of metal structures.
Must know: name and purpose of plumbing and measuring tools and devices and their use; methods for refilling plumbing tools; techniques for performing simple and medium-complexity metalwork operations and the process of assembling simple and medium-complexity metal structures; design and operating rules for lifting and transport devices, working and control instruments and devices; technological process, methods and techniques for assembling, fitting, checking and straightening metal structures; system of admissions and landings; properties, brands and range of materials and pipes used; methods of connecting parts for welding; rules and types of marking of assembled units.
Work examples
1. Cylindrical tanks and vessels operating under pressure up to 5 MPa (60 kgf/sq. cm) - assembly and hydraulic testing.
2. Parts made of sheet and strip steel - marking according to a template, editing.
3. Sheet steel parts - bending.
4. Parts made of high-quality steel of all profiles with a thickness of up to and over 6 mm - cutting, chopping
5. Various parts - filing of free sizes, cutting at angles, drilling according to markings.
6. Small-sized casings - assembly.
7. Caps, lids, brushes, vessels, funnels, boxes, cabinets of all sizes - preparation, straightening and assembly of parts for welding.
8. Sheet and profile metal - drilling, cutting with guillotine and press shears, joining for welding.
9. Strip and twisted metal - bending and cleaning after gas cutting.
10. Butt plates, stiffeners, temporary bolts - installation.
11. Supports and frames for devices - assembly.
12. Gaskets of simple and complex configurations made of sheet steel, cardboard, asbestos, clinoherite, rubber - manual cutting and cutting according to markings.
13. Staples made of material of different sections - flexible in the device.
14. Welded racks - assembly for welding.
15. Belt conveyors - assembly of metal structures.
16. Fittings made of pipes with flanges - assembly.
17. Metal cabinets and shelves - assembly.
§ 140. Mechanic for assembling metal structures, 3rd category
Characteristics of work. Assembly of metal structure assemblies of medium complexity for welding and riveting according to drawings and sketches using universal devices, as well as assembly of complex metal structure assemblies using universal assembly and special devices and templates. Adjustment of sealing surfaces. Marking locations for installation of simple basic parts and assemblies of metal structures. Assembly of complex metal structures together with a mechanic and electric welder of a higher qualification. Editing parts and assemblies of metal structures of medium complexity. Hydraulic and pneumatic tests of metal structures of medium complexity operating under pressure.
Must know: methods for marking places for installation of basic parts and assemblies of metal structures; structural design of devices used during assembly; methods of sharpening metalwork tools; state standards for materials used; system of tolerances, fits and their designation on drawings; requirements for the work performed; rules for working with a gas cutter and electric welding machine; sequence and methods of assembly on assembly racks and on conductors-copiers; assortment and grades of steel.
Work examples
1. Low pressure devices with detachable connections - assembly.
2. Oil tanks - manufacturing and assembly.
3. Cylindrical tanks and other vessels operating under pressure above 5 to 15 MPa (50 to 150 kgf/sq. cm) - assembly and hydraulic testing.
4. I-beams for monorails - assembly.
5. Baths of rolling equipment and oil gearboxes, pouring ladles of various capacities - assembly for welding.
6. Insulation of collectors - production and assembly of parts.
7. Plate and overhead conveyors - assembly of metal structures.
8. Door and window frames and metal doors with a rigid frame - assembly.
9. Counterweight housings - assembled for welding.
10. Stairs, platforms, purlins, bunker walls, decking, metal railings made of pipes and tees, brake sheets, fences, sliding supports, gratings - assembly.
11. Cylindrical and conical shells made of sheet metal - bending.
12. Settling tanks, measuring tanks, collection tanks - assembly.
13. Foundation slabs - assembly.
14. Louvre grilles, decking for openings, rod racks for fastening conductors, conductors for anchor bolts - assembly.
15. I-section rods - assembly of metal structures.
16. Trusses - assembly according to the copier.
§ 141. Mechanic for assembling metal structures, 4th category
Characteristics of work. Assembly of complex components of metal structures for welding and riveting according to drawings and assembly diagrams using universal devices, as well as assembly of complex components of metal structures using universal assembly and special devices and templates. Marking locations for installation of complex basic parts and assemblies of metal structures. Editing complex and complex parts and assemblies of metal structures. Cleaning for gumming welds manual pneumatic grinder. Participation in the assembly of experimental and unique components of metal structures under the guidance of a more highly qualified mechanic. Hydraulic and pneumatic testing of complex metal structures operating under pressure. Elimination of defects discovered after testing complex components of metal structures. Drawing up sketches and assembly diagrams. Assembly, lifting and installation with temporary distribution of metal structural elements in various positions at various heights.
Must know: technical specifications for the assembly of complex metal structures; system of admissions and landings; qualities and roughness parameters; the effect of heating metals (during welding) on their deformation; symbols of welds; methods of alignment of complex steel structures; installation rules and device lifting mechanisms and devices; methods for straightening complex metal structures in devices using templates and according to drawings; device and rules for setting up manual pneumatic machines.
Work examples
1. A-shaped trusses for excavators - assembly of individual units.
2. Cylindrical tanks and other vessels operating under pressure above 15 to 30 MPa (150 to 300 kgf/sq. cm) - assembly and hydrotesting.
3. T-section, box-shaped and lattice-section tanks for load-bearing metal structures - assembly.
4. Mixer bands - assembly.
5. Mixing drums with internal spirals - assembly.
6. Cell shafts of disk vacuum filters made of high-alloy steel - assembly.
7. Auger screws - assembly.
8. Drilling derricks - assembly of individual parts of metal structures.
9. Gas tanks, air collectors and water separators - assembly.
10. Gas pipelines - assembly.
11. Turbine casing frames - assembly.
12. Frames and casings of industrial ovens and dryers - assembly.
13. Protective casings - assembly, installation.
14. Structures of load-bearing pipeline bridges - assembly.
15. Conductors, copiers for farms - assembly.
16. Evaporator and condenser housings - assembly with spherical bottoms and fittings for welding.
17. Cranes with a lifting capacity of up to 100 tons - assembly of structures and individual components.
18. Monorails - assembly.
19. Lattice supports - assembly.
20. Welded dimensional tanks - assembly.
21. Ties and spacers - assembly.
22. Sections of drying drum nozzles - assembly.
23. Crossbars - assembly for welding.
24. Half-timbers - assembly of purlins and elements.
25. Refrigerators and inclined machines of blast furnaces - manufacturing and assembly.
26. Cabinets and drawers (waterproof) - assembly.
27. Electric blowers and turbo blowers - assembly.
28. Elements of radio towers, power line supports - assembly.
29. Elevators, smoke exhausters, exhausters - assembly.
§ 142. Mechanic for assembling metal structures, 5th category
Characteristics of work. Assembly of complex components of metal structures for welding and riveting according to drawings and assembly diagrams using universal and special devices and templates. Marking locations for installation of complex basic parts and assemblies of metal structures. Leveling and alignment of assembled metal structures. Construction of simple geometric figures using assembly diagrams and sketches. Assembly of experimental and unique components of metal structures. Hydraulic and pneumatic testing of complex metal structures operating under pressure. Elimination of defects discovered after testing complex components of metal structures.
Must know: purpose of various kinds of complex metal structures; operating conditions of lifting and transport devices, methods for determining their reliability; mechanical properties base metals; permissible tensile, bending, compression forces; mechanical characteristics of the lifting mechanisms used; techniques for performing rigging and welding work; the procedure for organizing work on the assembly of complex metal structures; methods for marking complex developments.
Work examples
1. Excavator base - assembly.
2. Water tanks, gas and air ducts, bunkers and chimneys - assembly.
3. Cylindrical tanks and other vessels operating under pressure over 30 MPa (300 kgf/sq. cm) - assembly and hydrotesting.
4. Main and end beams of overhead cranes - assembly.
5. Drums: coal grinding, ore grinding mills, mining machines - assembly.
6. Towers and frames of scoop dredgers - manufacturing of parts.
7. Car dumpers - assembly.
8. Sluice gates - assembly.
9. Thin-walled telescopic casings made of special steel - assembly.
10. Metal structures (trusses, columns, rafters, blocks, casings) - assembly, inspection of all structures.
11. Bridge structures - assembly.
12. Building structures - control and enlarged assembly, verification.
13. Containers with a carrying capacity of over 0.5 tons and organizational equipment with mechanical, telescopic and other drives for moving or lifting loads - manufacturing, assembly, adjustment and testing.
14. Mine pile drivers - manufacturing of parts.
15. Housings of heat exchangers - assembly.
16. Housings of cement, metallurgical and other furnaces of complex structures - checking the complete assembly.
17. Electrostatic precipitator housings - assembly.
18. Cranes with a lifting capacity of over 100 tons - assembly of structures and individual components.
19. Rotation mechanisms for excavators, loaders, portal cranes - control assembly.
20. Nozzle for dryers - installation in the housing.
21. Samples of simulators intended for training workers (crane operators and elevator operators) - manufacturing, assembly, adjustment and testing.
22. Technological equipment intended for the manufacture, assembly and testing of prototypes - manufacturing.
23. Furnaces for heat treatment - manufacturing of parts and installation.
24. Open hearth furnaces - assembly of metal structures.
25. Plates of automatic filter presses - assembly.
26. High pressure heaters - assembly.
27. Reactors, autoclaves, multi-chamber tunnel dryers - assembly.
28. High pressure tanks - assembly.
29. Elevator body sections - assembly.
30. Projectiles and dredging installations with a capacity of up to 300 cubic meters. m/h - assembly.
31. Complex shelving, chairs and armchairs with movement in three planes - manufacturing, assembly, testing.
32. A-shaped excavator trusses - general assembly.
33. Automatic filter presses - general installation.
34. Tanks - assembly.
35. High-power walking excavators - assembly.
§ 143. Mechanic for assembling metal structures, 6th category
Characteristics of work. Assembly, adjustment, testing and delivery in accordance with technical specifications complex metal structures, as well as experimental and unique components of metal structures that require increased accuracy of assembly work. Construction of complex geometric shapes using assembly diagrams and sketches. Participation in the preparation of a passport for the assembled components of metal structures. Hydraulic and pneumatic testing of experimental and unique components of metal structures operating under pressure. Checking the correct assembly of metal structures of varying complexity, taking operational diagrams and characteristics.
Must know: fundamentals of heat engineering, mechanics, geometry and trigonometry; principle of operation and rules of operation of complex metal structures; equipment, complex tools, devices and various devices used in the assembly of metal structures; sequence of assembly of metal structures; requirements for the assembly of structures and products subject to special tests; technology and technical conditions for the assembly of metal structures.
Work examples
1. Autoclaves, recuperators, muffleless, tempering and hardening units - production of units and installation.
2. Heat exchangers of complex design - production of pipe systems, general assembly, installation and testing.
3. Casings of blast furnaces, domes of air heaters, inclined bridges of blast furnaces - control and enlarged assembly.
4. Heavy power line supports - control and enlarged assembly.
5. Supports for tubular structures (television towers, radio towers) - assembly.
6. Projectiles and dredging installations with a capacity of over 300 cubic meters. m/h - assembly.
7. Circular air ducts, tangent inlets, elliptical nozzles - assembly.
Loading...
