Training in the working profession of a lathe-borer in Moscow guarantees that the specialist will be in demand on the labor market, and in recent years Russian economy there is a clear shortage of qualified technical specialists. You can get this profession in 3-16 weeks at our training center, where, based on the results of completing the classes, ready specialist will receive knowledge and a certificate that will significantly raise his status in the eyes of the employer.
Course Information
Find out the terms and cost of training or call 8 800 555-93-71 (toll-free within the Russian Federation)What does training include?
Training in a working profession involves studying theoretical material, as well as acquiring practical skills through completing tasks and analyzing situations related to further work activity.
Important point! A qualified specialist must understand all the nuances technological process, be able to use modern equipment, apply different techniques for solving production problems.
Sample ID
ETKS (Unified Tariff and Qualification Directory of Work and Professions of Workers)
Important point! Depending on the category assigned to the student, the timing of theoretical and practical classes may vary.
The Boring Turner training program covers the following theoretical and practical issues:
Select rank
Turner-borer training course 2nd category
Characteristics of the work.
Processing of simple parts according to 12 - 14 grades on universal boring machines and deep drilling machines using cutting tools and universal devices. Control of boring machines with a spindle diameter from 200 to 250 mm under the guidance of a more highly qualified boring machine turner.Must know:
design and operating principle of similar boring machines; name, purpose and conditions of use of the most common universal and special devices; arrangement of control and measuring instruments; angles and rules for sharpening and installing cutting tools; system of admissions and landings; qualities and roughness parameters; purpose and properties of cooling and lubricating fluids.Examples of work
1. Strikers of forging hammers - milling of grooves.2. Forks, earrings, rods, brackets - boring holes.
3. Parts up to 1300 mm long - milling of straight edges and chamfers.
4. Workpieces - trimming ends and centering.
5. Levers - preliminary boring of holes.
6. Simple flanges - preliminary boring of holes with trimming of the end.
7. Fitting flanges - drilling holes along the conductor.
8. Simple foundations - processing of planes.
9. Gears, wheels, runners - drilling and boring holes.
Sign up for a course (2nd category)
Turner-borer training course 3rd category
Characteristics of the work.
Parts processing medium difficulty for 8 - 11 qualifications on universal and jig boring machines using cutting tools and universal devices and for 7 - 10 qualifications on specialized machines, as well as on diamond boring machines of a certain type, set up for processing simple parts. Installation of parts and assemblies on the machine table with precise alignment in two planes. Control of boring machines with a spindle diameter of 250 mm and above.Must know:
device, rules for adjusting and checking the accuracy of boring machines various types; rules for controlling large-sized machines, serviced together with a more highly qualified boring machine lathe; device and rules for using universal and special devices; purpose and rules for using control and measuring instruments and instruments; cutting tool geometry, heat treatment; rules for sharpening and installing cutting tools; system of admissions and landings; qualities and roughness parameters; basic properties of processed materials.Examples of work
1. Punching hammers - milling grooves for stones.2. Rear headstocks of metal-cutting machines - drilling and preliminary boring.
3. Engine cylinder blocks - preliminary boring of holes for liners and liners.
4. Excavator eccentric yokes - boring and trimming.
5. Shafts - end milling with centering.
6. Pad inserts for rolling mills - boring recesses for the refrigerator.
7. Ship bearing shells - drilling sockets and holes up to 10 drill diameters deep, located at an angle to the parting plane.
8. Parts longer than 1300 mm - milling of straight edges and chamfers.
9. Parts and workpieces up to 1300 mm long - processing of curved edges and chamfers.
10. Parts of medium complexity - boring of elliptical cuts and necks, processing of chamfers.
11. Curly parts with necks and holes - boring holes, milling along the contour and processing chamfers.
12. Tank bottoms - boring holes with chamfers.
13. Drawing mill sprockets - drilling and boring holes.
14. Rings for bearings - boring holes and cutting ends.
15. Rings and flanges with a diameter of up to 1000 mm - drilling, drilling holes.
16. Jigs with holes in one or two planes - boring holes.
17. Bearing housings - preliminary boring and trimming of ends.
18. Gearbox housings - preliminary boring of holes for bearings.
19. Covers, bottoms, shells, sections - drilling, boring, milling of windows according to markings and given coordinates.
20. Matrices with round and rectangular windows - drilling and boring corner control holes.
21. Mortars - preliminary boring.
22. Connecting couplings - preliminary boring of holes.
23. Rolling mill knives, levers, cranks with hole diameters up to 100 mm - drilling and boring holes.
24. Four-jaw machine chucks - boring.
25. Partitions - drilling, boring and milling of windows according to markings and given coordinates.
26. Molds, simple templates and cams for automatic machines - boring.
27. Anchor plates - milling and drilling.
28. Tractor crawler frames - boring holes for axle shafts.
29. Steering wheel hubs with variable outer section - milling the outer contour according to the markings.
30. Calipers, racks of small machines, beds of large machines - boring holes.
31. Slam plates - drilling and boring holes.
32. Portal crane trolleys - boring holes for the roller axle.
33. Tees, elbows, pipes - trimming and boring.
34. Transitional chamfers on complex parts - milling straight edges.
35. Foundations - processing of planes.
36. Connecting rods - preliminary boring of the large and small heads.
Sign up for a course (3rd category)
Turner-borer training course 4th category
Characteristics of the work.
Processing of complex parts and assemblies according to 7 - 10 qualifications with a large number of transitions and settings on universal, jig boring, as well as diamond boring machines of various types. Processing of parts that require precise adherence to the distance between the centers of parallel holes, perpendicularity tolerance or specified axis locations. Boring using one or two boring bars simultaneously and a flying slide. Determination of the position of the coordinate axes when boring several holes located in two planes. Setting up machines. Control of boring machines with a spindle diameter over 200 mm.Must know:
device, kinematic diagrams and rules for checking the accuracy of boring machines of various types; design features and rules for the use of universal and special devices; arrangement of control and measuring instruments and devices; geometry, rules of heat treatment, sharpening and finishing of cutting tools; methods for setting up specialized boring bars; system of admissions and landings; qualities and roughness parameters.Examples of work
1. Rear headstocks of screw-cutting lathes - boring holes for the quill.2. Headstocks and guides of stamping hammers - boring center holes and milling parallels.
3. Rudder stocks for medium and large ships, ship intermediate shafts - milling of keyways.
4. Cantilever beams - marking, drilling and boring holes.
5. Crankshafts - boring holes in the crankpins, drilling and reaming holes in the flange.
6. Ship shafts - drilling, countersinking and reaming conical holes for connecting bolts in flanges.
7. Propellers with a diameter of up to 2000 mm - drilling and boring holes.
8. Mortar bushings - final boring.
9. Bushings for hydraulic turbine impellers - preliminary boring.
10. Conical heads and spherical bodies - drilling, boring holes and necks in various planes, cutting ends from the axis at given coordinates.
11. Turret heads - boring holes.
12. Complex parts with curved edges and a length of over 1300 mm - milling of edges and chamfers.
13. Bottoms - drilling, boring, reaming holes along given coordinates in various planes.
14. Flaps - boring holes for pressing bushings and boring bushings after pressing.
15. DUIM bodies - preliminary boring.
16. Flap bodies are complex, welded and stamped - boring holes and pockets with trimming the ends.
17. Housings and covers - boring oppositely located holes using a boring bar to the length of the table stroke.
18. Gearbox housings with two or more axes located in the same plane with a diameter of up to 300 mm - boring.
19. Filter housings with a diameter of over 1000 mm - final boring.
20. Hydraulic turbine stator columns - final boring.
21. Support bearing housings with a diameter of up to 400 mm - final boring.
22. Fuel pump housings, diesel liners - diamond boring.
23. Machine headstock housings - preliminary boring, end milling.
24. Gearbox housings - boring and cutting ends.
25. Cranks with a diameter of over 100 mm - boring of holes.
26. Brackets with intersecting hole axes - fine boring.
27. Overhead crane hooks - boring.
28. Matrices, fixtures and jig plates - boring of holes located in different planes.
29. Branch pipes for a blast furnace - sphere boring and cutting.
30. Partitions, brackets - drilling, boring, deployment of holes at given coordinates in various planes.
31. Molds, complex jigs - boring holes located in different planes.
32. Marine support bearings with a shaft diameter of up to 400 mm - final boring.
33. Beds of forging machines, beds of working and gear stands, beds of blooming shears - preliminary boring, milling and trimming.
34. Stators of turbogenerators - boring.
35. Tables of milling, drilling and forming machines - fine boring and milling of T-slots.
36. Ice propeller hubs - final boring of recesses and sockets for the blades.
37. Steering wheel hubs, tillers and other parts - milling of internal keyways.
38. Posts, sternposts - milling locks, grooves and drilling holes.
39. Foundations - processing in 2 or more planes.
40. Connecting rods of diesel engines, forging machines, main steam engines with a distance between centers of up to 1800 mm - final boring.
41. Dies for cutting rotor, stator and pole iron - marking, drilling, boring dies and punches, milling edges.
42. Dies - milling curved edges.
43. Brake pulleys, couplings - boring of conical holes.
Sign up for a course (4th category)
Turner-borer training course 5th category
Characteristics of the work.
Processing of complex parts and assemblies with a large number of processed external and internal surfaces, with places difficult to access for processing and measurements and compliance with dimensions according to 6 - 7 qualifications on universal boring machines. Processing of parts and assemblies with alignment in several planes using racks, boring bars, flying supports and milling heads. Cutting threads of various profiles and pitches. Coordinate boring of holes in and without fixtures, moving along coordinates using indicators and micrometric tiles. Boring of holes on diamond boring machines of all types in complex parts of 6th grade.Must know:
design features and rules for checking the accuracy of universal boring machines and various universal and special devices; geometry, rules of heat treatment, sharpening and finishing of various cutting tools and the influence of these factors on the cleanliness and accuracy of processing; rules for setting up and regulating instrumentation and instrumentation; rules for determining the cutting mode using reference books and machine data sheets.Examples of work
1. Nozzle apparatus - final boring of holes, grooves, grooves, platforms, pockets and thread cutting.2. High pressure drums - boring.
3. Engine cylinder blocks - final boring.
4. Marine propeller shafts - milling of keyways.
5. Propellers with a diameter of over 2000 mm - drilling and boring holes in the blades.
6. Vessel hydroskis, bow shield brackets - boring holes.
7. Diaphragms steam turbines with a diameter over 2000 mm - scraping milling of connectors and final boring.
8. Mortar cone rings - final boring of holes according to measurements from the shafting installation site.
9. Support bearing housings with a diameter of over 400 mm - final boring.
10. Compressor housings - final boring of holes for threading.
11. Multi-spindle head housings - boring holes for pressing in rolling bearings.
12. Float valve bodies - final boring.
13. Gearbox housings with intersecting hole axes - final boring of holes for bearings.
14. Housings, heads, conical and spherical units - milling planes, locks, boring holes with cutting ends at given coordinates.
15. Various gauges and devices - marking, drilling and boring holes.
16. Covers of large hydraulic cylinders, rudder brackets - boring and tapping holes.
17. Gear stands of rolling mills - boring of liners after pouring.
18. Jigs - boring holes in planes located at different angles.
19. Headstock housings of metal-cutting machines - final boring of holes.
20. Housings of turbopumps and pump gearboxes - fine boring.
21. Diesel cylinder covers - boring valve seats, trimming ends and reaming holes.
22. Complex matrices for dies, molds, injection molds - marking the working body, drilling and boring.
23. Electrical panels - drilling, boring holes, milling grooves.
24. Rudder blade - boring.
25. Multi-cavity molds - boring of holes located in different planes.
26. Multi-place devices and multi-punch dies - boring.
27. Marine support bearings with a shaft diameter over 400 mm - final boring.
28. Marine thrust bearings with shaft diameter up to 400 mm - final boring.
29. Frames of trolleys of overhead electric overhead cranes - boring.
30. Beds of forging machines, shears, working and gear stands of blooming - complete turning.
31. Hydraulic turbine stators - milling of joints.
32. Steering wheel hubs up to 300 mm long - boring of a tapered hole.
33. Calipers of large lathes, milling and other machines - boring and trimming.
34. Steam engine cylinders - final boring.
35. Hydraulic lift cylinders - complete turning.
36. Complex templates and patterns for distribution jaws and copiers - marking, drilling and boring.
37. Shabots of stamping hammers - boring and milling of dovetail grooves.
38. Main connecting rods of steam engines with a distance between centers of more than 1800 mm - final boring.
39. Gears of portal cranes with an offset hole for the axle of the crank mechanism - boring of holes.
40. Scales and verniers - marking and applying precise marks.
41. Articulated spindles for bloomings with a diameter of up to 1000 mm - boring and trimming.
Sign up for a course (5th category)
Turner-borer training course 6th category
Characteristics of the work.
Processing of complex experimental and expensive parts and tools according to grades 1 - 5 with a large number of transitions and settings, with places that are difficult to access for processing and measurement, and also requiring combined mounting and precise alignment in various planes during installation on boring machines of various types and designs. Coordinate boring of holes without devices with movement along coordinates using indicators and microscopic tiles. Processing of parts and assemblies using racks, boring bars, flying supports and milling heads. Cutting complex threads using threaded supports of various designs. Processing of complex large-sized parts and assemblies, as well as thin-walled parts subject to deformation, on unique boring machines.Must know:
design and rules for checking the accuracy of boring machines; methods for installing fastenings and alignment of complex parts and the universal special devices required for this; device, geometry and rules of heat treatment, sharpening and finishing of all types of cutting tools.Examples of work
1. Blocks of eight or more cylinder engines - boring for liners and crankshaft.2. Housings of high-speed multi-axis gearboxes - boring along six to seven axes.
3. Housings of powerful blowers - final boring of holes.
4. Working wheels of large water turbines - boring for working blades.
5. Large water turbine wheels assembled with shafts - boring holes for connecting bolts.
6. Headstock housings of large-sized machines - final boring.
7. Marine thrust bearings with a diameter of over 400 mm - final boring.
8. Marine thrust bearings of a special type with a diameter of over 800 mm - final boring.
9. Hydraulic turbine impeller shackles maintaining a center-to-center distance of up to 0.02 mm - final boring.
10. Multi-roll (fifty-roll) beds of sheet-leveling machines - milling planes and boring holes.
11. Stern tubes - boring.
12. Articulated spindles for bloomings with a diameter of over 1000 mm - boring and trimming.
Sign up for a course (6th category)
Who is vocational training aimed at?
Get useful, and most importantly in demand on the labor market working profession In Moscow, applicants who meet the following requirements are eligible:- age from 18 years; state of health corresponding to the profession; presence of a certain qualification (when assigning higher level ranks).
Do you want to become a turner? There are several training options - you can go to school, you can learn from a machine, or you can take turner courses in Moscow or throughout Russia.
Turner is a working specialty. In this specialty, a worker processes various hard materials. In most cases, the work involves wood, metal, plastic, etc. Everyone develops a profession and a turner is no exception. By attending turner courses and learning practically, a candidate for the profession learns the basics of the profession step by step.
A universal turner, using a lathe, processes and bores any surface, as well as cuts threads, drills and calibrates. Professional turner knows everything about lathe. To obtain such knowledge, it is necessary to carefully choose a reputable and professional educational institution or specialized turning courses that are popular and have good reputation. Also, when choosing courses, you should be interested in the availability of a license to provide such services and state accreditation.
Study to become a turner in Moscow
Throughout Russia, in every city, there are many educational institutions and courses for turners teaching students working specialty. Turner courses in Moscow, on at the moment, can be completed in almost 50 training centers for working specialties. And this is not counting dozens of vocational technical schools, where people from other cities of our country come to Moscow to study to become a turner. Also in Moscow there are entire training centers for the training of professional workers. One of the most famous training centers throughout the capital is the Tushinsky training center, located on Volokolamsk highway.
Studying to become a turner in Moscow is quite simple, since there is a large selection of educational institutions competing with each other for applicants and students. And, of course, each such center tries with all its might to improve the quality of training and practice provided.
Every person who wants to become a turner must undergo training at a special educational institution - a turner has the opportunity to take them at specialized turner courses.
While attending coursework, the student learns the theory and practice of turning necessary for professional activity turner. First come lecture materials, after which the acquired knowledge is recorded through practical training in specialized workshops or workshops located at the training center.
Turner course plan
In principle, in all Moscow and regional training professional centers, the training program for turners is the same and it consists of two areas: theory and practice.
The information course itself is divided into two parts:
- General. Students study on a PC using electronic textbooks. After the course, they take a test that tests the knowledge they have acquired.
- Specialized. This part of the course is taught directly to turners by a practitioner. Training centers attract professionals who have practical skills in turning. After completing this course there is an exam.
In turning courses, a lot of time is devoted to knowledge of labor protection. The profession of a turner, like all other working specialties, has its own dangerous sides. These include hot chips flying in different directions, heavy and large parts and workpieces. These are multifunctional machines and devices, without knowledge of the operation of which you can get seriously injured. Thus, the turner will not be allowed to work until he passes theoretical exam on work safety.
At the courses, turners are taught to understand drawings and learn how to properly use measuring devices. A turner candidate learns to use various cutters and processing modes for a particular part made of different materials. Upon completion of the turner courses, which can last up to 160 hours, a certificate of qualification and a turner certificate with a certain rank, valid for five years, are issued.
Turner training or advanced training courses are not free. Studying to become a turner in Moscow costs about 20 thousand rubles. In the regions, of course, they are cheaper, for example, in Chelyabinsk they cost about 15 thousand.
Whatever it is, if a person has a strong desire to become a turner, then he will not stand by the price. Moreover, the salary of a second-rate turner (entry level) in Moscow is about 14 thousand rubles per month. In fact, the courses cost one month’s salary of a novice turner.
Nowadays, more and more more people are interested in turning. Of course, based on the results of the turner courses, big money specialists will not earn money if this does not apply to turners - generalists of the 6th category, whose salary can reach up to 100 thousand rubles; the average salary of a turner of 4-5 categories in Russia is 40-50 thousand rubles. Although there is a “vein” in a person to strive for more, so you can reach the 6th category and earn decent money.
But in the work of a turner, not only money is important. And you can trade on the market, receiving the same 40 thousand. The work of a turner, in addition to earning money, has creativity, which is very pleasant for the soul of the master who looks at his creation with love. Each shapeless piece, after being processed by a master, turns into a useful thing. Isn't this real skill?
Today you can master it - come to study as a turner in Moscow or take turner courses in your city - it doesn’t matter where. It is important that this is quite realistic, affordable and promising for income and life. Career growth is inevitable here. He will not bypass you either.
The retraining center "Builder's School" offers to quickly issue a certificate and application for turner courses in Moscow. This specialty is classified as a blue-collar worker and is not characterized by the highest wages, but it is always in demand on the labor market. A lathe is a person who works at a lathe. He processes wood, metal, plastic.
What is included in lathe operator training?
The training program includes studying the duties of a turner, namely:
- Ability to properly use a lathe;
- check equipment for serviceability;
- manufacturing complex types of parts on a lathe;
- examination finished products, their qualities;
- observing and ensuring safety precautions while working on equipment.
Having a turner's license has undeniable advantages:
- Finding a job as a turner is very easy;
- The higher professional qualities masters, those more demand for his services;
- Wages not the highest, but above average;
- There is an opportunity to realize creative skills;
- There is a possibility of increasing the rank and, accordingly, the salary.
You can place an order for turner courses and certification in this specialty remotely, without interrupting your production. It is not necessary to visit the training center; you just need to contact our managers via email or phone.
What do you get after training?
You need to requalify every year. This allows you to increase your rank, improve and update your knowledge in your specialty. By ordering turner training in our center, everyone receives:
- a certificate confirming the level of qualification that fully complies state requirements;
- certificate, extract, diploma about the rank received, hours attended, stamp and name educational institution;
- protocol of the qualification commission on the decision made.
The specialty is divided into 6 categories. The latter indicates high theoretical and practical knowledge. Such a specialist can easily get a job with high pay labor.
You can obtain your ID remotely. To do this, you need to visit our website and contact the manager.
You can order certification, documents by mail or courier service. Delivery is carried out within 2-3 days throughout the Russian Federation and CIS countries. To know detailed information possible by phone or email our training center.
Licenses:
Specialties:
230101 – Computingcars, complexes, systemsAndnetworks(based on grades 9 and 11).
Duration of training – basic level / advanced level:
– based on 9 classes: 3 years 10 months / 4 years 10 months;
– based on 11 classes: 2 years 10 months / 3 years 10 months.
090108 – Informationsafety(based on 11 classes).
Duration of training: 2 years 10 months.
032002 – DocumentationsecuritymanagementAndarchival science(based on grades 9 and 11).
080504 – StateAndmunicipalcontrol(based on grades 9 and 11).
Duration of training: 2 years 10 months (based on 9 classes); 1 year 10 months (based on 11 classes).
Profession:
1 . 9 – Operatorelectronically- computingcars(based on grades 9 and 11).
Specialties:
150414 – InstallationAndtechnicalexploitationrefrigerated- compressorcarsAndinstallations(based on grades 9 and 11).
Duration of training: 3 years 10 months (based on 9 classes), 2 years 10 months (based on 11 classes);
080501 – Management(Byindustries) (based on 11 grades and primary vocational education).
Duration of training: 1 year 10 months.
Professions:
22 . 11 – Installersanitary- technical, ventilationsystemsAndequipment(ondatabase9 And11 classes).
2 . 13 – Turner- station wagon(ondatabase9 And11 classes). Duration of study: 3 years and 1 year.
2 . 14 – Milling operator- station wagon(ondatabase9 And11 classes). Duration of study: 3 years and 1 year.
2 . 17 – Locksmith(ondatabase9 And11 classes). Duration of study: 3 years and 1 year.
1 . 12 – ElectricianByrepairsAndserviceelectrical equipment(based on 9 classes). Duration of training: 3 years;
1 . 9 – Operatorelectronically- computingcars(based on grades 9 and 11).
Duration of training: 3 years and 1 year.
7 . 2 – Collectorpoints(based on 11 classes). Duration of training: 10 months.
ProfessionalPreparation:
19149 – Turner; 19479 – Milling operator; 18466 – Locksmithmechanical assemblyworks.
Duration of training: 2 years.
Speciality:
151001 – Technologymechanical engineering(based on 9 classes and primary vocational education in the specialty profile).
Duration of training: 3 years 10 months (based on 9 classes), 2 years 4 months (based on NGOs).
Professions:
2 . 12 – Machine operator(metalworking), operatormachine toolsWithCNC(based on 9 classes).
Duration of training: 3 years;
30 . 20 – Auto mechanic(ondatabase9 And11 classes).
Duration of training: 3 years and 1 year.
2 . 17 – Locksmith(ondatabase9 classes).
Duration of training: 3 years;
1 . 9 – Operatorelectronically- computingcars(based on 9 classes).
Duration of training: 3 years.
38 . 14 – Secretary(ondatabase9 classes).
Duration of training: 3 years;
ProfessionalPreparation:
based on 8 classes with obtaining the basic general education(9 classes):
19149 – Turner; 19479 Milling operator– duration of study: 2 years;
based on 9 classes for graduates of type VIII schools:
18466 – Locksmithmechanical assemblyworks– duration of study: 2 years.
Introductorytests:
based on 11 classes: Russian language (USE), and at the choice of applicants:
computer science and information and communication technologies (ICT) (USE)
or mathematics (USE);
based on 9 classes: Russian language (dictation), mathematics (written) or results
GIA in these disciplines;
on the basis of NGOs: Russian language (dictation), testing in special subjects.
At the level of primary vocational education – admission without exams.
Training is free. Deferment of service in the ranks of the RA. Scholarship. Preferential travel. Free food. Continuous vocational education. Continuation of studies at universities: MATI, MAMI, MGUPI, MFPA.
Loading...
